SIGNALING SYSTEM
5. Voltage
•
Connect the pocket tester (DC 20 V) to the
turn signal relay coupler (wire harness side)
as shown.
Positive tester probe
-*
brown/white
©
Negative tester probe
->
ground
•
Set the main switch to “ON”.
•
Measure the voltage (DC 12 V) on brown/
white
®
at the turn signal relay coupler (wire
harness side).
•
Is the voltage within specification?
YES
V
I
NO
The turn signal relay is
faulty and must be re-
placed.
A
B
6. Voltage
•
Connect the pocket tester (DC 20 V) to the
turn signal light connector or meter assem-
bly coupler (wire harness side) as shown.
ALeft turn signal light(front and rear)
BRight turn signal light(front and rear)
CTurn signal indicator light
Left turn signal light
Positive tester probe
-
Negative tester probe
Right turn signal light
Positive tester probe
-
Negative tester probe
chocolate
1
ground
dark green
2
ground
JJ B Ch [L
E -
-*- —,
\
B | Ch \
C
JJ B | Dg [L
u
\
B | Dg
©
Ch
Dg
Y
3 n
-JS)
Ch
Dg
Y
w v w
(D
•
Set the main switch to “ON”.
•
Set the turn signal switch to “
<^=i
” or “
i=£>
”.
•
Measure the voltage (DC 12 V) of the choco-
late
®
or dark green
(2)
at the turn signal
light connector (wire harness side).
•
Is the voltage within specification?
YES
V
*
NO
This circuit is OK.
The wiring circuit from
the turn signal switch to
the turn signal light con-
nector is faulty and must
be repaired.
8-39
Downloaded
from
www.ScooterTime.net
