CHECKING THE IGNITION TIMING
CHK
ADJ
<
&
5. Check:
8ignition timing
• • • • • • • • • • • • • • • • • • • • • • •
a. Start the engine, warm it up for several min-
utes, and then let it run at the specified en-
gine idling speed.
A
Engine idling speed
2000 ~ 2200r/min
b. Check that the mark a on the AC magneto
rotor is within the firing range b on the right
crankcase cover.
Incorrect firing range
-»
Check the ignition
system.
• • • • • • • • • • • • • • • • • • • • • • •
NOTE:
The ignition timing is not adjustable.
6. Remove:
•
timing light
•
digital circuit tester
7. Install:
•
fan case
•
radiator
•
radiator cover
Refer to”RADIATOR”in chapter 6.
8. Fill:
•
cooling system
(with the specified amount of the recom-
mended coolant)
Refer to”CHANGING THE COOLANT”.
9. Install:
•
single seat/trunk
•
battery /battery cover
•
side cover(left and right)
•
front cover
Refer to”COVER AND PANEL”.
3-21
Downloaded
from
www.ScooterTime.net
