CHANGING THE ENGINE OIL
CHK
ADJ
<
&
EAS00076
CHANGING THE ENGINE OIL
1. Start the engine, warm it up for several min-
utes, and then turn it off.
2. Place a container under the engine oil drain
bolt.
3. Remove:
8engine oil filler cap 1
8engine oil drain bolt 2
(along with the gasket)
4. Drain:
8engine oil
(completely from the crankcase)
5. If the oil filter element is also to be replaced
or cleaned, perform the following procedure.
• • • • • • • • • • • • • • • • • • • • • • •
a. Remove the oil strainer cover 1,spring3
and oil filter element 4 .
b. Replace the O-ring
New
2
c. Install the new or clean oil filter element and
the oil strainer cover.
Oil strainer cover
32Nm(3.2m
•
kg, 23.1ft
•
lb)
• • • • • • • • • • • • • • • • • • • • • • •
6. Install:
•
engine oil drain bolt
(along with the gasket)
X |
23Nm(2.3m
*
kg, 16.6ft
*
lb)
7. Fill:
•
crankcase
(with the specified amount of the recom-
mended engine oil)
«0
Quantity
Total amount
0.8~0.9L(0.74~0.83 Imp qt, 0.87~0.98
US qt)
Periodic oil change
0.73~0.83L(0.67~0.76 Imp qt,
0.80~0.90 US qt)
3-25
Downloaded
from
www.ScooterTime.net
