CHANGING THE COOLANT
EAS00105
CHANGING THE COOLANT
1. Remove:
8front cover
8side cover(right)
8coolant reservoir cap cover
Refer to”COVER AND PANEL”.
8radiator cover
Refer to”RADIATOR”in chapter 6.
2.
3.
Disconnect:
8coolant reservoir hose 1
Drain:
8coolant
(from the coolant reservoir)
8coolant
(from the radiator under drain bolt)
Remove:
8radiator cap
8coolant reservoir cap
w
4.
A hot radiator is under pressure. Therefore,
do not remove the radiator cap when the
engine is hot. Scalding hot fluid and steam
may be blown out, which could cause
serious injury. When the engine has cooled,
open the radiator cap as follows:
Place a thick rag or a towel over the radiator
cap and slowly turn the radiator cap
counterclockwise toward the detent to allow
any residual pressure to escape. When the
hissing sound has stopped, press down on
the radiator cap and turn it counterclockwise
to remove.
5. Connect:
8coolant reservoir hose
6. Install:
8radiator under drain bolt
X I
1Nm(0.1m
*
kg, 0.7ft
*
l b )
3-37
Downloaded
from
www.ScooterTime.net
