5-34
OIL FILTER ELEMENT AND WATER PUMP
OIL FILTER ELEMENT AND WATER PUMP
REMOVING THE OIL FILTER ELEMENT AND WATER PUMP
Order
Part name
Q'ty
Remarks
Right engine guard
Refer to "ENGINE REMOVAL" section.
Drain the engine oil.
Refer to "CHANGING THE ENGINE OIL"
section in the CHAPTER 3.
Drain the coolant.
Refer to "CHANGING THE COOLANT" sec-
tion.
Exhaust pipe
Refer to "EXHAUST PIPE AND SILENCER"
section.
Brake pedal
Refer to "ENGINE REMOVAL" section.
Clutch cover
Refer to "CLUTCH" section.
1
Oil filter element cover
1
2
Oil filter element
1
3
Coolant pipe 2
1
4
Water pump housing
1
5
Pin
2
6
Oil tank breather hose
1
7
Kickstarter crank
1
8
Right crankcase cover
1
10 Nm (1.0 m kg, 7.2 ft lb)
10 Nm (1.0 m kg, 7.2 ft lb)
10 Nm (1.0 m kg, 7.2 ft lb)
10 Nm (1.0 m kg, 7.2 ft lb)
10 Nm (1.0 m kg, 7.2 ft lb)
33 Nm (3.3 m kg, 24 ft lb)
14 Nm (1.4 m kg, 10 ft lb)
12 Nm (1.2 m kg, 8.7 ft lb)
Summary of Contents for 2010 WR450FZ
