REAR CONSTANT VELOCITY SHAFT ASSEMBLIES, FINAL
DRIVE ASSEMBLY AND REAR DRIVE SHAFT
8-30
2. Adjust:
• Gear backlash
▼▼▼
▼
▼ ▼▼▼
▼
▼ ▼▼▼
▼
▼ ▼▼▼
▼
▼ ▼▼▼
▼
▼ ▼▼▼
▼
▼▼▼
a. Select a suitable shim(s) and thrust wash-
er(s) using the following chart.
b. If increased by more than 0.2 mm (0.008 in):
Reduce the final driven pinion gear shim (final
drive case cover side) “4” thickness by 0.2
mm (0.008 in) for every 0.2 mm (0.008 in) that
the final driven pinion gear shim (final drive
case side) “2” and thrust washer “3” are in-
creased.
c. If reduced by more than 0.2 mm (0.008 in):
Increase the final driven pinion gear shim (fi-
nal drive case cover side) “4” thickness by 0.2
mm (0.008 in) for every 0.2 mm (0.008 in) that
the final driven pinion gear shim (final drive
case side) “2” and thrust washer “3” are de-
creased.
TIP
Be sure to use one of each of the final driven pin-
ion gear shim (final drive case side) “2” and
thrust washer “3” to obtain the shim and thrust
washer thickness.
▲▲▲
▲
▲ ▲▲▲
▲
▲ ▲▲▲
▲
▲ ▲▲▲
▲
▲ ▲▲▲
▲
▲ ▲▲▲
▲
▲▲▲
Thinner shim
Final gear backlash is in-
creased.
Thicker shim
Final gear backlash is de-
creased.
Final driven pinion gear shims (fi-
nal drive case side) “2”
Thickness (mm)
0.25 0.30 0.35 0.40 0.45 0.50
Thrust washers “3”
Thickness (mm)
4.50 4.80 5.10 5.40
1
4
3
2
Final driven pinion gear shims (fi-
nal drive case cover side) “4”
Thickness (mm)
0.25 0.30 0.35 0.40 0.45 0.50
Summary of Contents for 2016 Grizzly yf700gg
