Setting the auto power standby function
Enabling the auto power standby function prevents the unit from
remaining on when not in use. When the auto power standby
function is enabled, the unit automatically turns off in any of the
following situations.
• No operations for 8 hours
• No audio input and no operations for 20 minutes when Bluetooth
or HDMI is selected as the input source.
1
Turn off the unit.
2
Touch and hold
y
and touch
z
/CONNECT on the
unit.
The auto power standby function is enabled or disabled,
and the unit is turned on. The indicator shows auto
power standby function status for several seconds, and
then all indicators glow.
Glows (disabled)
Off (enabled)
NOTE
The default setting for the auto power standby function varies by country or region.
▪ U.K., Europe, and Korea models: enabled
▪ Other models: disabled
Enabling/disabling touch panel control
(child lock function)
Disable touch panel control to prevent children from accidentally
operating the unit. When touch panel control is disabled, operations
can be performed only via the remote control or dedicated free
“MusicCast CONTROLLER” app.
This function is enabled by default.
1
Turn off the unit.
2
Press and hold INFO at least three seconds.
The touch panel control is enabled or disabled, and the
unit is turned on. The indicator shows touch panel
control status for several seconds, and then all
indicators glow.
Glows (enabled)
Off (disabled)
En
44
