CVP-509/505/503/501 Owner’s Manual
29
Star
ting Up
While holding the C7 key (right-most key on the keyboard), turn the power on.
This restores the all settings (except Internet Settings, etc.) to the factory default.
You can also restore a specified setting to the factory default value, or save/load your
own reset settings. Call up the operation display: [FUNCTION]
→
[J] UTILITY
→
TAB [
E
][
F
] SYSTEM RESET. For details, refer to the Reference Manual on the
website.
This procedure backs up all data stored in USER drive (except Protected Songs) and
all settings including Internet Direct Connection settings.
For maximum data security Yamaha recommends that you copy or save your
important data to a USB storage device. This provides a convenient backup if the
internal memory is damaged.
1
Insert/connect the backup USB storage device (destination).
2
Call up the operation display.
[FUNCTION]
→
[J] UTILITY
→
TAB [
E
][
F
] OWNER
3
Press the [D] (BACKUP) button to save the data to the USB
storage device.
To restore the data, press the [E] (RESTORE) button in this display. When the
operation is complete, the instrument will be restarted automatically.
Restoring the Factory-programmed Settings
NOTE
If you want to initialize only the Regis-
tration Memory setting (page 79),
turn the power on while holding the
B6 key.
NOTE
To reset the Internet Settings, call up
the operation display: [INTERNET]
→
[5
▼
] SETTING
→
[A] NETWORK
SETTINGS
→
[E] INITIALIZE SET UP.
C7
Data Backup
NOTE
Before using a USB storage device, be
sure to read “Connecting a USB Stor-
age Device” on page 106.
NOTE
Completing the backup/restore opera-
tion may take a few minutes.
CAUTION
Move the Protected Songs
which are saved to the USER
display before restoring. If the
Songs are not moved, the oper-
ation deletes the data.
NOTE
To save the Song, Style, Registration
Memory Bank and Voice indepen-
dently, execute the Copy and Paste
operation from the File Selection dis-
play (page 70).
NOTE
To save the Music Finder Record,
Effect, MIDI Template and System
File, call up the operation display:
[FUNCTION]
→
[J] UTILITY
→
TAB
[
E
][
F
] SYSTEM RESET. For more
information, refer to the Reference
Manual on the website.
2
3