10
CVP-509/505/503/501 Reference Manual
V
oices – Pla
ying the K
e
yboard –
2
Editable Parameters in the VOICE SET Displays
The Voice Set parameters are organized into six different displays. The parameters in each display are
described separately, below.
NOTE
The available parameters differ depending on the Voice.
■
PIANO Page
This display is available only when the Natural! piano Voice (
■
COMMON Page
[1
▲▼
]/
[2
▲▼
]
TUNING
CURVE
Determines the tuning curve. Select “FLAT” if you feel the tuning curve
of the piano Voice does not quite match that of other instruments Voices.
STRETCH: Tuning curve particularly for pianos.
FLAT: Tuning curve in which the frequency is octave doubled over the
entire keyboard range.
[3
▲▼
]/
[4
▲▼
]
KEY OFF
SAMPLE
(CVP-509/505/503)
Adjusts the volume of the key-off sound (the subtle sound that occurs
when you release a key).
[5
▲▼
]/
[6
▲▼
]
SUSTAIN
SAMPLE
(CVP-509/505/503)
Adjusts the depth of sustain sampling for the damper pedal.
[7
▲▼
]/
[8
▲▼
]
STRING
RESONANCE
(CVP-509)
Adjusts the depth of string resonance.
[1
▲▼
]
VOLUME
Adjusts the volume of the current edited Voice.
[2
▲▼
]/
[3
▲▼
]
TOUCH SENSE
Adjusts the touch sensitivity (velocity sensitivity), or how greatly the vol-
ume responds to your playing strength.
DEPTH
Determines the velocity sensitivity, or how much the level of the Voice
changes in response to your playing strength (velocity).
OFFSET
Determines the amount by which received velocities are adjusted for the
actual velocity effect.
0
64
127
64
127
0
64
127
64
127
Actual Velocity for
tone generator
Depth=127 (twice)
Depth=64 (normal)
Depth=32 (half)
Depth=0
TOUCH SENSE DEPTH
Changes to velocity curve according to
VelDepth (with Offset set to 64)
Received Velocity
(Actual KeyOn speed)
TOUCH SENSE OFFSET
Changes to velocity curve according to
VelOffset (with Depth set to 64)
Actual Velocity for
tone generator
Received Velocity
(Actual KeyOn
speed)
Offset=96 (+64)
Offset=127 (+127)
Offset=64 (normal)
Offset=32 (-64)
Offset=0 (-127)
Depends
on offset
Depends
on offset