24
CVP-509/505/503/501 Reference Manual
Styles – Pla
ying Rh
ythm and Accompaniment –
3
5
Use the [5
▲▼
]/[6
▲▼
] buttons to determine the length (number of measures) of the
selected section, then press the [D] (EXECUTE) button to actually enter the specified
length.
6
Specify the channel to be recorded by simultaneously holding down the [F] (REC CH)
button and pressing the appropriate numbered button, [1
▼
]–[8
▼
].
To cancel the selection, press the corresponding [1
▼
]–[8
▼
] button again.
7
Call up the Voice Selection display by using the [1
▲
]–[8
▲
] buttons and select the
desired Voice for the corresponding recording channels.
Press the [EXIT] button to close the Voice Selection display.
8
If necessary, delete a channel by simultaneously holding down the [J] (DELETE)
button and pressing the appropriate numbered button, [1
▲
]–[8
▲
].
You can cancel the deletion by pressing the same numbered button again before releasing your finger from
the [J] button.
NOTE
When recording channels BASS–PHR2 based on the existing Style, you have to delete the original data before recording.
Recordable Voices
• RHY1 channel
Any except your original Organ Flute, SA and SA2 Voices are recordable.
• RHY2 channel
Only drum/SFX kits are recordable.
• BASS–PHR2 channels
Any except your original Organ Flute, drum/SFX kits, SA and SA2 Voices are recordable.
NOTE
Preset Organ Flute Voice can be recorded to the RHY1 and BASS–PHR2 channels.
7
6
