86
CVP-509/505/503/501 Reference Manual
Connections
– Using
Y
our Instr
ument with Other De
vices –
10
Assigning Specific Functions to Each Foot Pedal
In addition to the footswitch or foot controller, the three piano pedals installed to the instrument (Right,
Center and Left pedals) can also be assigned to various functions here. The following explanations cover the
related operations and assignable functions (parameters).
NOTE
For information on how to connect a foot pedal or what kinds of pedals can be connected, refer to the Owner’s Manual, chapter 10.
1
Call up the operation display.
[FUNCTION]
→
[D] CONTROLLER
→
TAB [
E
][
F
] PEDAL
2
Use the [A]/[B] buttons to select one of the three pedals or the AUX-connected pedal,
to which the function is to be assigned.
3
Use the [1
▲▼
] buttons to select the function to be assigned to the pedal specified in
step 2.
For information on available parameters, see
.
NOTE
You can also assign the other functions to the pedal—punch in/out of Song (
). If you assign multiple func-
tions to the pedal, the priority is: Punch in/out of Song
→
Registration Sequence
→
Functions assigned here.
4
Use the [2
▲▼
]–[8
▲▼
] buttons to set the details of the selected functions (the part
for which the function is applied, etc.).
The available parameters differ depending on the function selected in step 3.
5
When you have selected the left or center pedal in step 2, press the [H] (DEPEND ON
R1 VOICE) button to turn this parameter OFF.
This setting locks the pedal function so that it does not change automatically when you change the Right 1
Voice.
6
If necessary, set the polarity of the pedal by using the [I] button.
Pedal on/off operation may differ depending on the particular pedal you’ve connected to the instrument.
For example, pressing down on one pedal may turn the selected function on, while pressing a different
make/brand of pedal may turn the function off. If necessary, use this setting to reverse the operation.
■
Assignable Pedal Functions
For functions indicated with “*”, use only the foot controller; proper operation cannot be done with a
footswitch.
Footswitch/Foot Controller Settings
ARTICULATION 1/2
(CVP-509/505)
When you use a Super Articulation Voice that has an effect assigned to the
pedal/footswitch, you can enable the effect by pressing the pedal/footswitch.
You can turn this function on or off for each keyboard part on this display.
2
3
6
5
4
