CVP-509/505/503/501 Reference Manual
89
Connections
– Using
Y
our Instr
ument with Other De
vices –
10
In this section, you can make MIDI-related settings for the instrument. The CVP-509/505/503/501 gives you
a set of ten pre-programmed templates that let you instantly and easily reconfigure the instrument to match
your particular MIDI application or external device. Also, you can edit the pre-programmed templates and
save up to ten of your original templates to the USER display.
NOTE
You can save all your original templates as a single file to a USB storage device: [FUNCTION]
→
[J] UTILITY
→
TAB [
E
][
F
] SYSTEM RESET
→
[G]
1
Call up the operation display.
[FUNCTION]
→
[I] MIDI
2
Select a pre-programmed template from the PRESET Page (
If you have already created your original template and saved it to the USER Page, you can also select the
template from the USER Page.
3
Press the [8
▼
] (EDIT) button to call up the MIDI display to edit the selected template.
4
Use the TAB [
E
][
F
] buttons to call up the relevant setting display.
•
SYSTEM
)
•
TRANSMIT
MIDI Transmission Settings (
)
•
RECEIVE
MIDI Reception Settings (
•
BASS
Settings for the bass note of chord for Style playback via MIDI reception data
(
•
CHORD DETECT
Settings for the chord type for Style playback via MIDI reception data (
PERCUSSION
The pedal plays a percussion instrument selected by the [4
▲▼
]–[8
▲▼
] but-
tons. You can use the keyboard to select the desired percussion instrument.
NOTE
When you select the percussion instrument by pressing a key on the keyboard, the velocity with which you
press the key determines the percussion volume.
RIGHT 1 ON/OFF
Same as the PART ON/OFF [RIGHT 1] button.
RIGHT 2 ON/OFF
Same as the PART ON/OFF [RIGHT 2] button.
LEFT ON/OFF
Same as the PART ON/OFF [LEFT] button.
OTS +/-
Calls up the next/previous One Touch Setting.
MIDI Settings
3
6
2
