Voice Menu
81
CLP-585/575/545/535/565GP Owner’s Manual
Voice Edit (Voice names)*
Volume
Adjusts the volume for each of the R1/R2/L Voices. This
lets you adjust the balance between the R1/R2/L Voices
when Dual/Split is on.
Differs depending
on the Voice or
Voice
combination.
0 – 127
Reverb depth
Adjusts the Reverb depth for each of the R1/R2/L Voices.
This lets you adjust the balance between the R1/R2/L
Voices when Dual/Split is on. The “0” setting will produce
no effect.
NOTE (CLP-5
8
5/575)
When a VRM Voice is used for several parts simultaneously,
unexpected sounds may result since the Reverb depth for a
part which has priority will become the common setting for the
parts. During Song playback, setting for a Song part is used
(priority order: Ch. 1, Ch. 2...Ch. 16), while the setting for a
keyboard part is used when Song playback is stopped
(priority order: R1, L and R2 Voices).
Differs depending
on the Voice or
Voice
combination.
0 – 127
Chorus Depth
Adjusts the Chorus depth for each of the R1/R2/L Voices.
This lets you adjust the balance between the R1/R2/L
Voices when Dual/Split is on. The “0” setting will produce
no effect.
NOTE (CLP-5
8
5/575)
When a VRM Voice is used for several parts simultaneously,
unexpected sounds may result since the Chorus depth for a
part which has priority will become the common setting for the
parts. During Song playback, setting for a Song part is used
(priority order: Ch. 1, Ch. 2...Ch. 16), while the setting for a
keyboard part is used when Song playback is stopped
(priority order: R1, L and R2 Voices).
Differs depending
on the Voice or
Voice
combination.
0 – 127
Effect
In addition Reverb and Chorus, another Effect can be
applied to the R1/R2/L Voices of the keyboard
independently. Note that this Effect type can be selected
for up to two Voices.
NOTE (CLP-5
8
5/575)
The Effect Type cannot be applied to the VRM Piano Voice.
Differs depending
on the Voice or
Voice
combination.
Refer to the Effect
Type List
(page 83).
Rotary Speed
Available only for the Voice of which the Effect Type is set
to “Rotary.” This parameter determines the rotation
speed of the Rotary Speaker effect.
Differs depending
on the Voice or
Voice
combination.
Fast, Slow
VibeRotor
Available only for the Voice of which the Effect Type is set
to “VibeRotor.” This parameter turns on or off the
VibeRotor effect.
Differs depending
on the Voice or
Voice
combination.
On, Off
VibeRotor
Speed
Available only for the Voice of which the Effect Type is set
to “VibeRotor.” This parameter determines the speed of
the Vibraphone vibrato effect.
Differs depending
on the Voice or
Voice
combination.
1 – 10
Effect depth
Adjusts the Effect depth for each of the R1/R2/L Voices.
Note that some Effect types do not allow you to adjust the
depth.
NOTE (CLP-5
8
5/575)
The Effect depth cannot be applied to the VRM Piano Voice.
Differs depending
on the Voice or
Voice
combination.
1 – 127
Pan
Adjusts the stereo pan position for each of the R1/R2/L
Voices.
Differs depending
on the Voice or
Voice
combination.
L64 (leftmost) – C
(center) – R63
(rightmost)
To call up the desired parameter:
T
u
rn on D
u
al or Split as necessary, select Voices as necessary, press the [MENU] b
u
tton several times to select “Voice Men
u
,”
then
u
se the [
u
]/[
d
]/[<]/[>] b
u
ttons to select the desired parameter.
[>]
[<]
[>]
[<]
[>]
[<]
Description
Default settin
g
Settin
g
ran
g
e
Summary of Contents for 585
Page 125: ......