Yamaha Acoustic, Supplementary Manual

13

4 Band 2 Tap Mod. Delay

4-band delay connected in parallel w/2 multi-tap modulation delays.

*n = delay band no.

2 Band 4 Tap Mod. Delay

2-band delay connected in parallel w/4 multi-tap modulation delay.

*n = delay band no.

Parameter

Display

Range

Description

Wave Form

W.F.

Triangle, Saw Up, Saw Down

Selects the modulation waveform used for “other” in the Wave Parame-
ter below.

Effect Level

ELVL

0.0 to 10.0

Effect level

Direct Level

DLVL

0.0 to 10.0

Level of direct sound

Direct Pan

DPAN

L10.0 to R10.0

Pan for direct sound

* Edit window no. corresponds to delay band no. and tap no.

Page1:Band1 Tap1, Page2:Band1 Tap2, Page3:Band2 Tap1, Page4:Band2 Tap2, 
Page5:Band3 Tap1, Page6:Band3 Tap2, Page7:Band4 Tap1, Page8:Band4 Tap2

Time

DTn

0.1 to 1430.0 ms

Delay time (Page1, Page3, Page5, Page7)

Low Cut Filter

LCFn

Off to 10.0

Filter cuts low frequencies (Page1, Page3, Page5, Page7)

High Cut Filter

HCFn

Off to 10.0

Filter cuts high frequencies (Page1, Page3, Page5, Page7)

Feedback

FBn

0.0 to 10.0

Delay’s feedback level (Page1, Page3, Page5, Page7)

Wave

WAVn

Sine, Other

Modulation waveform. Sine wave or other (“other” is the wave selected 
in the Wave Form Parameter above).

Phase

PHSn

Normal, Reverse

Phase of the delay

Tap

TAPn

0 to 100 %

The output time of the delay sound in regard to the time of the delay 
loop (see 

page 31

)

Speed

SPDn

0.0 to 10.0

Modulation speed (modulation phase if the band is synchronized with 
another band)

Depth

DPTn

0.0 to 10.0

Modulation depth

Pan

PANn

L10.0 to R10.0

Position in the stereo field of the delay sound.

Level

LVLn

0.0 to 10.0

Delay level

Sync

SYNn

1 to 8

Setting to synchronize the modulation of different bands (set to any 
number other than the band number of the current band, it will syn-
chronize with that band. If set to the same number as the current band, 
it will not synchronize.)

Parameter

Display

Range

Description

Wave Form

W.F.

Triangle, Saw Up, Saw Down

Selects the modulation waveform used for “other” in the Wave Parame-
ter below.

Effect Level

ELVL

0.0 to 10.0

Effect level

Direct Level

DLVL

0.0 to 10.0

Level of direct sound

Direct Pan

DPAN

L10.0 to R10.0

Pan for direct sound

* Edit window no. corresponds to delay band no. and tap no.

Page1:Band1 Tap1, Page2:Band1 Tap2, Page3:Band1 Tap3, Page4:Band1 Tap4, 
Page5:Band2 Tap1, Page6:Band2 Tap2, Page7:Band2 Tap3, Page8:Band2 Tap4

Time

DTn

0.2 to 2920.0 ms

Delay time (Page1, Page5 only)

Low Cut Filter

LCFn

Off to 10.0

Filter cuts low frequencies (Page1, Page5 only)

High Cut Filter

HCFn

Off to 10.0

Filter cuts high frequencies (Page1, Page5 only)

Feedback

FBn

0.0 to 10.0

Delay’s feedback level (Page1, Page5 only)

Wave

WAVn

Sine, Other

Modulation waveform. Sine wave or other (“other” is the wave selected 
in the Wave Form Parameter above).

Phase

PHSn

Normal, Reverse

Phase of the delay

Tap

TAPn

0 to 100 %

The output time of the delay sound in regard to the time of the delay 
loop (see 

page 31

)

Speed

SPDn

0.0 to 10.0

Modulation speed (modulation phase if the band is synchronized with 
another band)

Depth

DPTn

0.0 to 10.0

Modulation depth

Pan

PANn

L10.0 to R10.0

Position in the stereo field of the delay sound.

Level

LVLn

0.0 to 10.0

Delay level

Sync

SYNn

1 to 8

Setting to synchronize the modulation of different bands (set to any 
number other than the band number of the current band, it will syn-
chronize with that band. If set to the same number as the current band, 
it will not synchronize.)