20
Reverb->Symphonic
Reverb and symphonic effects in series.
Reverb->Pan
Reverb and autopan effects in series.
Delay+Early Ref.
Delay and early reflections effects in parallel.
Parameter
Display
Range
Description
Wave
WAVE
Sine, Triangle
Modulation waveform
Initial Delay
IDLY
0.0 to 500.0 ms
Initial delay before reverb begins
Freq.
FREQ
0.05 to 40.00 Hz
Modulation speed
Mod. Delay
MDT
0.0 to 500.0 ms
Modulation delay time
Reverb Time
RT
0.3 to 99.0 s
Reverb time
High Ratio
HRAT
0.1 to 1.0
High-frequency reverb time ratio
Diffusion
DIFF
0 to 10
Left and right reverb spread
Density
DNST
0 to 100%
Reverb density
High Pass Filter
HPF
Thru, 21.2 Hz to 8.00 kHz
High-pass filter cutoff frequency
Low Pass Filter
LPF
50.0 Hz to 16.0 kHz, Thru
Low-pass filter cutoff frequency
Reverb Balance
BAL
0 to 100%
Reverb and symphonic reverb balance
(0% = all symphonic reverb, 100% = all reverb)
Depth
DPTH
0 to 100%
Modulation depth
Mix
MIX
0 to 100%
Mix level
Parameter
Display
Range
Description
Wave
WAVE
Sine, Triangle, Square
Modulation waveform
Initial Delay
IDLY
0.0 to 500.0 ms
Initial delay before reverb begins
Freq.
FREQ
0.05 to 40.00 Hz
Modulation speed
Reverb Time
RT
0.3 to 99.0 s
Reverb time
High Ratio
HRAT
0.1 to 1.0
High-frequency reverb time ratio
Diffusion
DIFF
0 to 10
Left and right reverb spread
Density
DNST
0 to 100%
Reverb density
High Pass Filter
HPF
Thru, 21.2 Hz to 8.00 kHz
High-pass filter cutoff frequency
Low Pass Filter
LPF
50.0 Hz to 16.0 kHz, Thru
Low-pass filter cutoff frequency
Reverb Balance
BAL
0 to 100%
Reverb and panned reverb balance
(0% = all panned reverb, 100% = all reverb)
Depth
DPTH
0 to 100%
Modulation depth
Direction
DIR
L<–>R, L–>R, L<–R,
Turn L, Turn R
Panning direction
Mix
MIX
0 to 100%
Mix level
Parameter
Display
Range
Description
Delay L
DT.L
0.0 to 1000.0 ms
Left channel delay time
Delay R
DT.R
0.0 to 1000.0 ms
Right channel delay time
FB. Delay
DTFB
0.0 to 1000.0 ms
Feedback delay time
FB. Gain
FB
–99 to +99%
Feedback gain (plus values for normal-phase feedback, minus values for
reverse-phase feedback)
High Ratio
HRAT
0.1 to 1.0
High-frequency feedback ratio
High Pass Filter
HPF
Thru, 21.2 Hz to 8.00 kHz
High-pass filter cutoff frequency
Low Pass Filter
LPF
50.0 Hz to 16.0 kHz, Thru
Low-pass filter cutoff frequency
Delay/ER
BAL
0 to 100%
Delay and early reflections balance
(0% = all delay, 100% = all early reflections)
Mix
MIX
0 to 100%
Mix level
Type
TYPE
Small Hall, Large Hall, Random,
Reverse, Plate, Spring
Type of early reflection simulation
Initial Delay
IDLY
0.0 to 500.0 ms
Initial delay before reverb begins
Room Size
SIZE
0.2 to 20.0
Reflection spacing
Liveness
LIVE
0 to 10
Early reflections decay characteristics (0 = dead, 10 = live)
Diffusion
DIFF
0 to 10
Left and right early reflections spread
Density
DNST
0 to 100%
Reverb density
ER Number
ERNO
1 to 19
Number of early reflections
Summary of Contents for Acoustic
Page 1: ...EFFECT LIST...
Page 32: ...Printed in China WD92180...
