5
Amp Simulator
DG Series amp sound. Mainly used for direct connection to power amp.
Speaker simulator allows direct recording.
Chorus
Chorus effect.
Symphonic
Symphonic effect.
Parameter
Display
Range
Description
Amp Type
AMP
Heavy1, Heavy2, Lead1, Lead2,
Drive1, Drive2, Crunch1,
Crunch2, Clean1, Clean2, Solid
Amp type
Gain
GAIN
0.0 to 10.0
Adjusts the amount of distortion
Master
MSTR
0.0 to 10.0
Adjusts the volume
Tone
TONE
0.0 to 10.0
Adjusts the tone
Treble
TRE
0.0 to 10.0
Adjusts level of high range frequencies
High Middle
HMID
0.0 to 10.0
Adjusts level of upper mid frequencies
Low Middle
LMID
0.0 to 10.0
Adjusts level of lower mid frequencies
Bass
BASS
0.0 to 10.0
Adjusts level of low frequencies
Presence
PRE
0.0 to 10.0
Adjusts level of extremely high frequencies
Speaker
Simulator
SP
Off, American 412, British 412,
Modern 412, YAMAHA 412, Hybrid
412, American 212, British 212,
Modern 212, YAMAHA 212, Hybrid
212, American 112, Modern 112,
YAMAHA 112, Hybrid 112, 410,
210
When using a line connection to connect directly to a mixer, this can be
used to simulate the natural characteristics of a speaker giving the tone
a more natural sound
N. G. Threshold
NGTH
0.0 to 10.0
Level at which the noise gate activates
N. G. Attack
NGAT
0 to 120 ms
Time required for the noise gate to open after signal exceeds threshold
N. G. Hold
NGHL
0.02 to 2040 ms
Time noise gate stays open
N. G. Decay
NGDC
6 to 44500 ms
Time required for the noise gate to close after signal goes below thresh-
old
Parameter
Display
Range
Description
Wave
WAVE
Sine, Triangle
Modulation waveform
Freq.
FREQ
0.05 to 40.00 Hz
Modulation speed
AM Depth
AMDP
0 to 100%
Amplitude modulation depth
PM Depth
PMDP
0 to 100%
Pitch modulation depth
Mod. Delay
MDT
0.0 to 500.0 ms
Modulation delay time
LSH Freq.
LSHF
21.2 Hz to 8.00 kHz
Low shelving filter frequency
LSH Gain
LSHG
–12.0 to +12.0 dB
Low shelving filter gain
EQ Freq.
EQ.F
100 Hz to 8.00 kHz
EQ (peaking type) frequency
EQ Gain
EQ.G
–12.0 to +12.0 dB
EQ (peaking type) gain
EQ Q
EQ.Q
10.0 to 0.10
EQ (peaking type) bandwidth
HSH Freq.
HSHF
50.0 Hz to 16.0 kHz
High shelving filter frequency
HSH Gain
HSHG
–12.0 to +12.0 dB
High shelving filter gain
Mix
MIX
0 to 100%
Mix level
Parameter
Display
Range
Description
Wave
WAVE
Sine, Triangle
Modulation waveform
Freq.
FREQ
0.05 to 40.00 Hz
Modulation speed
Depth
DPT
0 to 100%
Modulation depth
Mod. Delay
MDT
0.0 to 500.0 ms
Modulation delay time
LSH Freq.
LSHF
21.2 Hz to 8.00 kHz
Low shelving filter frequency
LSH Gain
LSHG
–12.0 to +12.0 dB
Low shelving filter gain
EQ Freq.
EQ.F
100 Hz to 8.00 kHz
EQ (peaking type) frequency
EQ Gain
EQ.G
–12.0 to +12.0 dB
EQ (peaking type) gain
EQ Q
EQ.Q
10.0 to 0.10
EQ (peaking type) bandwidth
HSH Freq.
HSHF
50.0 Hz to 16.0 kHz
High shelving filter frequency
HSH Gain
HSHG
–12.0 to +12.0 dB
High shelving filter gain
Mix
MIX
0 to 100%
Mix level
Summary of Contents for Acoustic
Page 1: ...EFFECT LIST...
Page 32: ...Printed in China WD92180...
