19
Flange
Reverb and flanger effects in parallel.
Reverb->Flange
Reverb and flanger effects in series.
Symphonic
Reverb and symphonic effects in parallel.
Parameter
Display
Range
Description
Wave
WAVE
Sine, Triangle
Modulation waveform
Initial Delay
IDLY
0.0 to 500.0 ms
Initial delay before reverb begins
Freq.
FREQ
0.05 to 40.00 Hz
Modulation speed
Mod. Delay
MDT
0.0 to 500.0 ms
Modulation delay time
FB. Gain
FB
–99 to +99%
Feedback gain (plus values for normal-phase feedback, minus values for
reverse-phase feedback)
Reverb Time
RT
0.3 to 99.0 s
Reverb time
High Ratio
HRAT
0.1 to 1.0
High-frequency reverb time ratio
Diffusion
DIFF
0 to 10
Left and right reverb spread
Density
DNST
0 to 100%
Reverb density
High Pass Filter
HPF
Thru, 21.2 Hz to 8.00 kHz
High-pass filter cutoff frequency
Low Pass Filter
LPF
50.0 Hz to 16.0 kHz, Thru
Low-pass filter cutoff frequency
Reverb/Flange
BAL
0 to 100%
Reverb and flange balance (0% = all reverb, 100% = all flange)
Depth
DPTH
0 to 100%
Modulation depth
Mix
MIX
0 to 100%
Mix level
Parameter
Display
Range
Description
Wave
WAVE
Sine, Triangle
Modulation waveform
Initial Delay
IDLY
0.0 to 500.0 ms
Initial delay before reverb begins
Freq.
FREQ
0.05 to 40.00 Hz
Modulation speed
Mod. Delay
MDT
0.0 to 500.0 ms
Modulation delay time
FB. Gain
FB
–99 to +99%
Feedback gain (plus values for normal-phase feedback, minus values for
reverse-phase feedback)
Reverb Time
RT
0.3 to 99.0 s
Reverb time
High Ratio
HRAT
0.1 to 1.0
High-frequency reverb time ratio
Diffusion
DIFF
0 to 10
Left and right reverb spread
Density
DNST
0 to 100%
Reverb density
High Pass Filter
HPF
Thru, 21.2 Hz to 8.00 kHz
High-pass filter cutoff frequency
Low Pass Filter
LPF
50.0 Hz to 16.0 kHz, Thru
Low-pass filter cutoff frequency
Reverb Balance
BAL
0 to 100%
Reverb and flanged reverb balance
(0% = all flanged reverb, 100% = all reverb)
Depth
DPTH
0 to 100%
Modulation depth
Mix
MIX
0 to 100%
Mix level
Parameter
Display
Range
Description
Wave
WAVE
Sine, Triangle
Modulation waveform
Initial Delay
IDLY
0.0 to 500.0 ms
Initial delay before reverb begins
Freq.
FREQ
0.05 to 40.00 Hz
Modulation speed
Mod. Delay
MDT
0.0 to 500.0 ms
Modulation delay time
Reverb Time
RT
0.3 to 99.0 s
Reverb time
High Ratio
HRAT
0.1 to 1.0
High-frequency reverb time ratio
Diffusion
DIFF
0 to 10
Left and right reverb spread
Density
DNST
0 to 100%
Reverb density
High Pass Filter
HPF
Thru, 21.2 Hz to 8.00 kHz
High-pass filter cutoff frequency
Low Pass Filter
LPF
50.0 Hz to 16.0 kHz, Thru
Low-pass filter cutoff frequency
Reverb/
Symphonic
BAL
0 to 100%
Reverb and symphonic balance
(0% = all reverb, 100% = all symphonic)
Depth
DPTH
0 to 100%
Modulation depth
Mix
MIX
0 to 100%
Mix level
Summary of Contents for Acoustic
Page 1: ...EFFECT LIST...
Page 32: ...Printed in China WD92180...
