36
AD8HR
When the test ends correctly, the following appears on the terminal software.
and "01" in [d01] flashes on the 7 segment LED.
When an error or problem occurs, the following error list appears on the terminal software.
After [E00] flashes 3 times on the 7 segment LED, the display [d00] lights up.
Error list is as follows:
[1]
SRAM (IC010, IC011)Data Bus
OOOO OOOO OOXX OOOO
SRAM (IC010, IC011)Address Bus X X OO OOOO OOOO OOO
Check SRAM Data Bus
OOOO OOOO OOOO OOOO OK
Check SRAM Address Bus OOOO OOOO OOOO OOO OK
:
:
DIAG [00] AUTO CHECK RESULT
OK
AD8HR_DIAG>
DIAG[ 00] AUTO CHECK RESULT
NG
ERROR LIST
[6] ATSC2
During the testing, [d--] appears on the 7 segment LED. The status is also displayed as follows on the terminal software.
Select [d00] and run the auto test by pressing [+48V] key when "00" flashes. Program can also be run when "0" is input
from HyperTerminal.
AD8HR Diagnosis version Vx.xx [TOTAL TEST]
x.xx: version
[Esc]
: SHOW DIAGNOSIS MENU
0
: AUTOMATIC TEST
1
: LED TEST
2
: SWITCH TEST
3
: SUB TEST
4
: TRIM PRESET MEASUREMENT(AUTO)
5
: TRIM PRESET MEASUREMENT(MANUAL)
6
: COM A/B TEST
7
: CMG ADJUSTMENT
8
: ANALOG TEST
9
: +48V TEST
A
: JITTER TEST (48kHz)
B
: JITTER TEST (96kHz)
C
: MEMORY INITIALIZE
ver[Enter]
: SHOW SOFTWARE VERSION
date[Enter]
: SHOW THE DATE OF MANUFACTURE
reset[Enter]
: SYSTEM RESET
AD8HR_DIAG>
