d
Line [
K
(
R
)] input jack ([
K
] input jack on the AG03MK2)
AG06MK2
Connect an electronic keyboard, audio device or other line-level equipment here. Channels 3/4 use phone plugs, and
channels 5/6 use RCA pin type plugs. Use the channel 3 [L/MONO] jack to connect a device with a monaural output.
When doing so, the audio input from the [L/MONO] jack is output to both the L and R channels of the mixer output.
AG03MK2
Connect an electronic keyboard, audio device or other line-level equipment here. Use the channel 2 [L/MONO] jack to
connect a device with a monaural output. When doing so, the audio input from the [L/MONO] jack is output to both
the L and R channels of the mixer output. This does not work when the [GUITAR/LINE] selector switch is set to GUITAR
(
O
).
e
Guitar [
G
] input jack (AG03MK2 only)
Connect an electric guitar, bass guitar or similar instruments here. Compatible with phone plugs. This does not work
when the [GUITAR/LINE] selector switch
h
is set to LINE (
N
).
f
[LINE] switch
When this is set to on (
O
), the input sound is attenuated. If the sound distorts even when you turn the [GAIN]
m
knob all the way to minimum, or if the [PEAK] LED
r
lights frequently, set this to on (
O
).
NOTE
Turn the faders and knobs to the minimum setting before you toggle the [LINE switch]. This is because you may hear a noise
when the [LINE switch] is toggled.
g
[GUITAR] switch (AG06MK2 only)
Use this switch to change the input impedance for channel 2, either on (
O
) or off (
N
). Set this to on when directly
connecting an instrument with high output impedance like an electric guitar or bass guitar to channel 2. If you will
use the “on” setting for this switch, connect your instrument to this product with an unbalanced phone connector.
The product will not work correctly if you use a balanced cable.
WARNING
(
Set the knobs for the speaker, headphone and other output controls to their minimum setting before toggling this
switch. This is because the levels may suddenly get loud, which could damage your hearing or cause external devices to
malfunction.
h
[GUITAR/LINE] selector switch (AG03MK2 only)
Use this switch to change the input for channel 2. Set this to GUITAR (
O
) when directly connecting an instrument
with high output impedance like an electric guitar or bass guitar to the guitar [
G
] input jack
e
. Set this to LINE
(
N
) when connecting a line-level device to the line [
K
] input jack
d
. If you will use the GUITAR setting for this
switch, connect your instrument to this product with an unbalanced phone connector. The product will not work
correctly if you use a balanced cable.
WARNING
(
Set the knobs for the speaker, headphone and other output controls to their minimum setting before toggling this
switch. This is because the levels may suddenly get loud, which could damage your hearing or cause external devices to
malfunction.
12
Component names and functions > Front side
