i
Phantom [+48V CH1-2MIC] switch/[+48V CH1-2MIC] LED (AG06MK2 only)
When this switch is turned on (
O
), the [+48V CH1-2MIC] LED lights, and DC +48 V phantom power is supplied to the
XLR plug connected to the mic/line input jacks for channels 1 and 2
c
. Turn this switch on when you are using a
condenser mic.
NOTICE
(
Turn the switch off if you don’t need phantom power.
(
To prevent this product or your external device from malfunctioning and to prevent noise, turn this switch off before
connecting a device that does not support phantom power to channels 1 or 2.
(
To prevent this product or your external device from malfunctioning and to prevent noise, do not unplug or insert a
cable into channels 1 and 2 while the switch is still on.
(
To prevent this product or your external device from malfunctioning and to prevent noise, turn phantom power on/off
only when the channel 1/2 level knobs are at minimum (0) setting.
j
Phantom [+48V] switch/[+48V] LED (AG03MK2 only)
When this switch is turned on (
O
), the [+48V] LED lights, and DC +48 V phantom power is supplied to the XLR plug
connected to the mic/line input jack
c
for channel 1. Turn this switch on when you are using a condenser mic.
NOTICE
(
Turn the switch off if you don’t need phantom power.
(
To prevent this product or your external device from malfunctioning and to prevent noise, set this switch to off before
connecting a device that does not support phantom power to channel 1.
(
To prevent this product or your external device from malfunctioning and to prevent noise, do not unplug or insert a
cable into channel 1 while the switch is still on.
(
To prevent this product or your external device from malfunctioning and to prevent noise, turn phantom power on/off
only when the level knob for channel 1 is at minimum (0) setting.
k
[GAIN HIGH LOW] switch (AG03MK2 only)
Determines the base volume for channels 2/3. Set this to LOW (
O
) if the sound is distorting.
NOTE
Turn the level knob to the minimum setting before you toggle the [GAIN HIGH LOW] switch. This is because you may hear a
noise when toggling the [GAIN HIGH LOW] switch.
l
[HIGH LOW] switch (AG06MK2 only)
Determines the base volume for channels 3/4 and 5/6. Set this to LOW (
O
) if the sound is distorting.
NOTE
Turn the level knob to the minimum setting before you toggle the [HIGH LOW] switch. This is because you may hear a noise
when toggling the [HIGH LOW] switch.
m
[GAIN] knob
Determines the base volume for the respective channel. Adjust the knob so that the [PEAK] LED
r
lights only briefly
when you sing loudly or play strongly.
n
[COMP/EQ] button
Turns the compressor and equalizer on (the LED lights up yellow). This is set at the optimal setting for livestreaming
by default. This keeps down unnecessary noise in the low end and helps smooth out differences in the input levels.
o
[AMP SIM] button (AG06MK2 only)
Turns the amp simulator on (the LED lights up yellow). The amp simulator recreates the sound of playing an electric
guitar through an amplifier. This simulates the characteristic “distorted” amp sound that’s heard when you directly
connect an electric guitar.
13
Component names and functions > Front side
