Connecting to Android devices
This explains what to do to power this unit, up through connecting to an Android device. An external power
supply is required to connect to an Android device.
What you need
(
USB power adapter or USB mobile battery (at least 5 V, 1 A)
(
USB cable (commercially available, for power supply)
(
3.5 mm 4-conductor stereo mini cable
NOTE
(
This product can’t input/output audio via the USB cable.
(
The audio signal sent to the Android device is monaural.
(
When using this product for streaming or otherwise using it for long periods of time, have a power supply on hand for powering
your Android device.
Connecting
1
Make sure that the volume on this product and on the connected device is turned
all the way down.
2
Connect a commercially-available USB power adapter, USB mobile battery or
similar device to the [5V DC IN] USB port on the rear of this unit.
To a
power supply
Rear panel
USB cable
(commercially available)
USB
power adapter
3
Check whether the power LED of this product is lit.
19
Getting ready to use this product > Connecting to Android devices