Periodic maintenance and adjustment
7-31
1
2
3
4
5
6
7
8
9
10
11
12
EAU70550
Replacing the brake/tail light
bulb
1. Remove the brake/tail light lens by
removing the screws.
2. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws.
NOTICE:
Do not over-
tighten the screws, otherwise
the lens may break.
[ECA10682]
EAU24233
Replacing a turn signal light
bulb
1. Remove the turn signal lens by
pushing it down lightly, then pulling
it outward.
TIP
The lens holder will fall out of the turn
signal when removing the lens, so take
care not to loose it.
2. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the holder, and then place
the lens in the original position.
1. Screw
2. Brake/tail light lens
3. Brake/tail light bulb
3
2
1
1. Turn signal light lens
2. Turn signal light bulb
3. Lens holder
1
2
3
BP2-9-25.book 31 ページ ２０２０年７月２８日 火曜日 午後３時５０分
