Periodic maintenance and adjustment
7-29
1
2
3
4
5
6
7
8
9
10
11
12
EAU23563
Replacing the fuses
The main fuse is located behind panel
A. (See page 7-7.)
The auxiliary DC jack fuse is located
behind panel B. (See page 7-7.)
If a fuse is blown, replace it as follows.
1. Turn the key to “OFF” and turn off
the electrical circuit in question.
2. Remove the blown fuse, and then
install a new fuse of the specified
amperage.
WARNING! Do not
use a fuse of a higher amperage
rating than recommended to
avoid causing extensive dam-
age to the electrical system and
possibly a fire.
[EWA15132]
3. Turn the key to “ON” and turn on
the electrical circuit in question to
check if the device operates.
4. If the fuse immediately blows
again, have a Yamaha dealer
check the electrical system.
1. Main fuse
2. Spare main fuse
2
1
1. Auxiliary DC jack fuse
2. Spare fuse
Specified fuses:
Main fuse:
20.0 A
Auxiliary DC jack fuse:
10.0 A
1
2
BP2-9-25.book 29 ページ ２０２０年７月２８日 火曜日 午後３時５０分
