Selecting & Playing Voices
Owner’s Manual
22
ENGLISH
[EFFECT]
The [EFFECT] button allows you to select an effect to give your sound greater depth
and animation.
OFF:
When no effect is selected, no EFFECT indicator is lit.
CHORUS:
A shimmering, broadening effect
PHASER:
Adds a sweeping effect to the sound.
TREMOLO:
Tremolo effect
ROTARY SP:
Adds the vibrato effect of a rotary speaker.
To select an effect type, press the
[EFFECT]
button a few times until the indicator corre-
sponding to the desired type lights (the indicators light in sequence each time you press
the
[EFFECT]
button). No effect is produced when all indicators are off.
Adjusting Effect Depth
You can adjust the effect depth for the selected voice by using the
[–/NO]
and
[+/YES]
buttons while holding the
[EFFECT]
button.
The depth range is from 0 through 20. The current depth setting appears on the LED
display while the
[EFFECT]
button is held.
[DAMPER RES.]
The Damper Resonance lets you hear a simulation of the sustain sound of the damper
pedal on a grand piano, as you press the damper pedal and play the keyboard.
This effect is applied to the entire sound of the instrument.
Pressing the
[DAMPER RES.]
button repeatedly toggles the Damper Resonance on and
off.
Adjusting DAMPER RES. Depth
You can adjust the Damper Resonance depth by using the
[–/NO]
and
[+/YES]
buttons
while holding the
[DAMPER RES.]
button.
The depth range is from 0 through 20. The current depth setting appears on the LED
display while the
[DAMPER RES.]
button is held.
NOTE
The default effect type (including
OFF) and depth settings are dif-
ferent for each voice.
NOTE
Releasing the
[EFFECT]
button
changes the effect type.
If you have changed the depth
settings, releasing the
[EFFECT]
button will not change the effect
type.
Procedure
NOTE
Depth 0:
no effect
Depth 20:
maximum effect depth
NOTE
Default depth settings are differ-
ent for each voice.
NOTE
Normal setting = ON
NOTE
Depth 0:
no effect
Depth 20:
maximum depth
Procedure
