40
En
Pairing the center unit and subwoofer manually
1
Turn off the unit.
2
Press and hold the SUBWOOFER (–) key on the
remote control for more than 3 seconds.
The DPL indicator on the center unit flashes.
3
Within 30 seconds, press and hold the PAIRING
button on the rear panel of the subwoofer for more
than 3 seconds.
Once the center unit and subwoofer have been paired and a
wireless connection established, the
indicator will glow, and
the center unit and subwoofer turn on.
If the
indicator on the subwoofer does not glow after following the
procedure described here, refer to “Troubleshooting” (p. 34).
NOTE
• Pairing is the process of establishing a wireless connection between the center unit
and subwoofer.
Center unit
Flashes
PAIRING STANDBY
PAIRING
STANDBY
PAIRING button
indicator
