PLAYBACK
➤
Configuring playback settings for different playback sources (Option menu)
En
85
■
Tone Control (Tone Control)
Adjusts the high-frequency range (Treble) and low-frequency range (Bass) of sounds.
Choices
Treble (Treble), Bass (Bass)
Setting range
-6.0 dB to Bypass (Bypass) to +6.0 dB, *0.5 dB increments
Default
Bypass (Bypass)
• If you set an extreme value, sounds may not match those from other channels.
Adjusting with the front panel controls
a
Press TONE/BALANCE repeatedly to select “Treble” or “Bass”.
b
Press PROGRAM to make an adjustment.
■
Adaptive DRC (Adaptive DRC)
Sets whether the dynamic range (from maximum to minimum) is automatically adjusted
when the volume level is adjusted. When it is set to “On”, it is useful for listening to
playback at a low volume at night.
Settings
If “On” is selected, the dynamic range becomes narrow at a low volume and wide at a
high volume.
■
CINEMA DSP 3D Mode (CINEMA DSP 3D)
Enables/disables CINEMA DSP 3D (p.54). If this function is set to “On”, CINEMA DSP
3D functions with the selected sound programs (except 2ch Stereo and 7ch Stereo).
Settings
Hold/Unhold
(Hold/Unhold)
(U.S.A. model only)
Enables/disables the hold function when the unit is
tuned into an HD Radio station.
Traffic Program
(TrafficProgram)
(U.K. and Europe models only)
Automatically searches for a traffic information
station.
Repeat
(Repeat)
Configures the repeat setting for the iPod (p.67),
USB storage device (p.70), or media server (p.73).
—
Shuffle
(Shuffle)
Configures the shuffle setting for the iPod (p.67),
USB storage device (p.70), or media server (p.73).
—
Item
Function
Page
On (On)
Automatically adjusts the dynamic range.
Off (Off) (default)
The dynamic range is not automatically adjusted.
On (On) (default)
Enables CINEMA DSP 3D.
Off (Off)
Disables CINEMA DSP 3D.
Volume: low
Volume: high
Input level
Input level
On
Off
On
Off
Out
put
level
Out
put
level
