TUNING
28
Presetting stations
■
Automatically presetting stations
(for FM stations)
This function enables this system to automatically tune in
to FM stations with strong signals, and to store up to 40
(8 stations x 5 groups) of those stations in order. This
feature enables you to easily tune in to any preset station
by selecting the preset station number.
1
Press PRESET/BAND to select the FM band.
2
Press AUTO/MAN’L so that the “AUTO”
indicator lights up on the front panel display.
3
Press and hold MEMORY for more than
3 seconds.
The preset number and the “MEMORY” and
“AUTO” indicators flash. Then, after about
5 seconds, automatic preset tuning begins from the
frequency currently displayed toward the higher
frequencies.
When automatic preset tuning is completed, the front
panel display shows the frequency of the last preset
station.
y
• When a station data is stored under a preset number, the
frequency and reception band are also stored.
• You can manually replace a preset station with another FM or
AM station by simply following the procedure in the section
“Exchanging preset stations” on page 29.
• If the number of the received stations does not reach E8,
automatic preset tuning has automatically stopped after
searching all stations.
Notes
• Any stored station data existing under a preset number is
cleared when you store a new station under that preset number.
• Only FM stations with sufficient signal strength are stored
automatically by automatic preset tuning. If the station you
want to store is weak in signal strength, tune in to it manually
in the monaural mode, and store it by following the procedure
in “Manually presetting stations”.
You can also store AM stations manually.
Automatic preset tuning options
You can select the preset group and number from which
this system will store FM stations and/or begin tuning
toward lower or higher frequencies.
1
Follow steps 1 and 2 described in
“Automatically presetting stations (for FM
stations)” on the left.
(After keeping MEMORY pressed for more than 3
seconds)
2
Press A/B/C/D/E and
d
PRESET/TUNING
u
to select the preset number under which the
first station will be stored.
Automatic preset tuning will stop when stations have
all been stored up to E8.
3
Press PRESET/BAND to turn off the colon (:)
and then press
d
PRESET/TUNING
u
.
When pressing
d
, automatic preset tuning begins
from the frequency currently displayed toward the
lower frequencies, and when pressing
u
, it begins
toward the higher ones.
■
Manually presetting stations
You can also store up to 40 stations (8 stations x 5
groups) manually.
You can also store AM stations manually.
1
Tune in to a station.
See page 27 for tuning instructions.
When tuned in to a station, the front panel display
shows the frequency of received station.
2
Press MEMORY.
The “MEMORY” indicator flashes for about
5 seconds.
3
Press A/B/C/D/E repeatedly to select a preset
station group (A to E) while the “MEMORY”
indicator is flashing.
The group letter appears and make sure that the
colon (:) appears on the front panel display.
4
Press
d
PRESET/TUNING
u
to select a
preset station number (1 to 8) while the
“MEMORY” indicator is flashing.
Press
u
to select a higher preset station number.
Press
d
to select a lower preset station number.
MEMORY
AUTO/MAN'L
A/B/C/D/E
PRESET/BAND
PRESET/TUNING
STEREO
DSP
INPUT
VOLUME
+
–
INPUT MODE
PRESET/BAND
MEMORY
AUTO/MAN'L
A/B/C/D/E
d
PRESET/TUNING
u
E5-S80-27-29(5.1)b
02.6.29, 4:33 AM
28
