236
Reference section
How to read the Reference section
This page explains how to read the Reference section.
A
Screen name
B
Page name/title
C
Function
A brief explanation of the functions available in
this page.
D
Key operation
The procedure for accessing this page from the
panel.
→
indicates the order in which keys are to be
pressed.
Example: [SONG] key
→
[F1] (Song List) key
(After pressing the [SONG] key, press the [F1] key)
+ indicates that you should hold down one key
and press the other key.
Example: [SHIFT]] key + [SONG] key
(Hold down the [SHIFT] key and press the
[SONG] key)
E
Functions in the screen
Explanations of the functions or displays in this
screen.
F
Additional functions
Explanations of the additional functions assigned
to the function keys ([F1]–[F5] keys) in this page.
You must hold down the [SHIFT] key in order to
access these additional functions.
HOME screen
IN/Rtn/MONI page
Monitor the input level of each channel
Function
This page displays the input level of input
channels 1–8, return channels 1/2, and
monitor channels 1–16.
Key operations
• [HOME] key
→
[F1] (IN/Rtn/MONI) key
• Repeatedly press the [HOME] key until
the screen shown at the right appears.
Screen functions
A
Level meters
This area indicates the input level of each channel.
Below each level meter, the location of the fader
for that channel is displayed in dB units.
B
PRE EQ button
C
POST EQ button
D
POST FADER button
Use these three buttons to select the location
within the signal routing that will be displayed by
the level meters (
1
). Turning on the PRE EQ but-
ton will display the pre-EQ signal level, the POST
EQ button will display the post-EQ signal level,
and the POST FADER button will display the post-
fader signal level. This is convenient when you
want to see the location at which the input signal
of that channel is clipping.
E
STEREO OUT LEVEL
This displays the position of the STEREO fader in
dB units.
■
Additional functions in the IN/Rtn/
MONI page
In the IN/Rtn/MONI page, holding down the [SHIFT]
key will assign the following additional function to
the [F1] key.
• [F1] (PEAK HOLD) key
Switches the Peak Hold function on/off. When
peak hold is on, a “
” symbol indicating the
peak level will be maintained in the level meter
(
1
). The peak hold setting also affects the level
meters displayed in pages other than in the EQ/
ATT/GRP screen and the DYN/DLY screen.
2
3
4
5
1
ATT
4BAND EQ
DYNAMICS
etc.
PAN
LEVEL
ON
PRE EQ
INPUT SELECT
METER
POST EQ
METER
POST FADER
METER
3
2
1
4
5
6