14
En
■
Connecting to the NETWORK terminal and USB BD STORAGE/SERVICE
terminal
– You can enjoy a variety of contents with interactive functions by connecting to the internet when playing BD-LIVE
compatible discs. Refer to pages 24 and 25 regarding further information on BD-LIVE functions.
– You can connect a USB memory device (2GB or greater and formatted with FAT 32/16) to the USB BD
STORAGE/SERVICE terminal to save the Virtual Package/BD-LIVE data or to update the software of this Player.
– Firmly connect a network cable (commercially available) and a USB memory device (commercially available) to
the NETWORK terminal and USB BD STORAGE/SERVICE terminal (
1
and
2
, and
3
).
– Use only an STP (shielded twisted pair) network cable.
– When using the internet, a broadband internet connection as shown below is required.
Caution!
Be sure to turn off this Player and the equipment before making any connections.
After connecting
– Perform the communication setting. (Page 34–36)
– Load a BD-LIVE compatible disc and play back the contents. (Page 20–24)
Broadband Internet Connection
UT
DIGITAL OUT
COAXIAL
S VIDEO
OPTICAL
HDMI
NETWORK
USB
BD STORAGE/
SERVICE
REMOTE CONTROL
OUT
IN
LAN
This Player
Notes
– When using a broadband internet
connection, a contract with an internet
service provider is required. For more
details, contact your nearest internet service
provider.
– Refer to the operation manual of the
equipment you have as the connected
equipment and connection method may
differ depending on your internet
environment.
– Use a network cable/router supporting
10BASE-T/100BASE-TX.
1
To NETWORK
terminal
Internet
Modem
Network cable
(commercially available)
2
To LAN terminal
Hub or
broadband router
PC
3
To USB BD
STORAGE/SERVICE
terminal
USB memory device
(commercially available)