8
En
GETTING STARTED
1
STANDBY/ON
button (
Press to switch the unit from on to standby mode or vice versa. In
standby mode, the unit is still consuming a small amount of power.
2
Disc tray (
3
Display
The indicator blinks when reading data from a disc or card.
4
SD Card LED
• It is possible to set the LED to turn on/off. (
21, SD Card
LED Control)
5
SD card slot (
12)
6
Remote control signal sensor (
7
Open or close the disc tray (
8
Search/Slow-motion/Skip (
Search:
Press and hold (During play)
Slow-motion: Press and hold (During pause)
Skip:
Press
9
Start play (
0
Pause (
q
Stop (
10)
Rear panel terminals (
After connecting your new player and pressing the standby/on button, a screen for the basic settings will appear.
Disc indicator
SD card indicator
EASY SETTING
Preparation
Turn on the television and select the appropriate video input on the television.
1
Press [
STANDBY/ON
].
➜
Setup screen appears.
2
Follow the on-screen instructions and make the settings with
[
,
] and [
OK
].
➜
“On-screen Language” and “TV Aspect” (
19) are set.
• You can perform this setup anytime by
selecting “Easy Setting” in the Setup
menu. (
• You can also change these settings
individually. (
19)
• If this unit is connected to a Panasonic TV
(VIERA) supporting HDAVI Control 2 or
HDAVI Control 3 via an HDMI cable,
then the “On-screen Language” and “TV
Aspect” setting information on the TV are
captured from the TV.
Tips