14
En
■
Connecting to the NETWORK terminal and USB/BD STORAGE terminal
– PC contents can be played back by connecting this Player to the network.
– You can enjoy a variety of contents with interactive functions by connecting to the internet when playing BD-Live
compatible discs. Refer to page 23 regarding further information on BD-Live functions.
– You can connect a USB memory device (2 GB or greater and formatted with FAT 32/16) to the USB/BD
STORAGE terminal to save the BD-Live data or to upgrade the software of this Player.
– Firmly connect a network cable (commercially available) and a USB memory device (commercially available) to
the NETWORK terminal and USB/BD STORAGE terminal.
– Use only an STP (shielded twisted pair) network cable.
– When using the internet, a broadband internet connection as shown below is required.
– Connect the other connector of the network cable to the hub/broadband router.
– The USB memory device connected to the USB port on the front panel works same as the one connected to the
USB/BD STORAGE terminal on the rear panel.
Before using the USB memory device
After connecting
– When you set the Network setting manually, refer to “Network” (p. 27).
– To play back the PC contents on your network, refer to “Using network content” (p. 19).
NETWORK AND USB CONNECTION
R
L
COAXIAL
COMPONENT
Y
P
B
P
R
OPTICAL
VIDEO
DIGITAL OUT
AUDIO OUT
VIDEO OUT
NETWORK
USB BD STORAGE
HDMI
LAN
This Player
Notes
– When using a broadband internet
connection, a contract with an internet
service provider is required. For more
details, contact your nearest internet service
provider.
– Refer to the operation manual of the
equipment you have as the connected
equipment and connection method may
differ depending on your internet
environment.
– Use a network cable/router supporting
10BASE-T/100BASE-TX.
CAUTION:
– Do not remove the USB memory device
or unplug the power cable while the
operations for BUDA (p. 35) or software
upgrade are being performed.
– Do not use a USB extension cable when
connecting a USB memory device to the
USB/BD STORAGE terminal of the
Player. Using a USB extension cable
may prevent the Player from performing
correctly.
Note
– Yamaha cannot guarantee that all brands’
USB memory devices will operate with
this Player.
To NETWORK
terminal
Internet
Modem
Network cable
(commercially available)
Hub or
broadband router
PC
To USB/BD
STORAGE
Terminal
USB memory device
(commercially available)
To LAN
terminal
