Switching on the power
5
Switching on the power
5
Switching on the power
5
Figure 2. System connections
Switching on the power
1)
Switch on the SCSI devices: CBX-D5, hard disk.
2)
Switch on the Atari computer and load Cubase Audio.
What to do next
•
The SCSI hard disk must be formatted before it can be used (refer to the hard disk’s
Operating Manual). See also “Working with Hard Disks” on page 18 of the CBX-D5
Operating Manual.
•
For recording and playback you should refer to the Cubase Audio Operating
Manuals. See also “Recording” on page 20 and “Playback” on page 23 of the
CBX-D5 Operating Manual.
Notes:
•
Other MIDI devices can be connected in this system as shown in “MIDI” on page 30
of the CBX-D5 Operating Manual.
•
For audio device connection, see “Inputs & Outputs Explained” on page 26 of the
CBX-D5 Operating Manual.
•
For more details about SCSI hard disks and connecting extra disks, see “Connecting
Hard Disk Drives” on page 13 of the CBX-D5 Operating Manual.
•
The Atari TT’s internal hard disk should be used to store your computer software and
data such as Cubase Audio, MIDI song files, etc., and the external hard disk should
be used purely for recording CBX-D5 sound files. An external hard disk must be used
in this system, because it supplies the termination power that is required by the SCSI
bus.
ATARI
TT
CBX-D5
HARD
DISK
MIDI IN
MIDI OUT
SCSI
SCSI
SCSI
TERMINATOR
POWER
CABLE
POWER
CABLE
SCSI
50-WAY SCSI
CABLE
POWER
CABLE
25-pin DSUB to
50-WAY SCSI CABLE
MIDI IN
MIDI OUT
MIDI CABLES
