background image

Read Instructions – All the safety and operating
instructions should be read before the unit is operated.

2

Retain Instructions – The safety and operating instructions
should be retained for future reference.

3

Heed Warnings – All warnings on the unit and in the
operating instructions should be adhered to.

4

Follow Instructions – All operating and other instructions
should be followed.

5

Water and Moisture – The unit should not be used near
water – for example, near a bathtub, washbowl, kitchen
sink, laundry tub, in a wet basement, or near a swimming
pool, etc.

6

Carts and Stands – The unit should be used only with a
cart or stand that is recommended by the manufacturer.

6A

A unit and cart combination should be
moved with care. Quick stops,
excessive force, and uneven surfaces
may cause the unit and 
cart combination to overturn.

7

Wall or Ceiling Mounting – The unit
should be mounted to a wall or ceiling only as
recommended by the manufacturer.

8

Ventilation – The unit should be situated so that its
location or position does not interfere with its proper
ventilation.  For example, the unit should not be situated
on a bed, sofa, rug, or similar surface, that may block the
ventilation openings; or placed in a built-in installation,
such as a bookcase or cabinet that may impede the flow
of air through the ventilation openings.

9

Heat – The unit should be situated away from heat
sources such as radiators, stoves, or other appliances
that produce heat.

10

Power Sources – The unit should be connected to a
power supply only of the type described in the operating
instructions or as marked on the unit.

11

Power-Cord Protection – Power-supply cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the unit.

12

Cleaning – The unit should be cleaned only as
recommended by the manufacturer.

13

Nonuse Periods – The power cord of the unit should be
unplugged from the outlet when left unused for a long
period of time.

14

Object and Liquid Entry – Care should be taken so that
objects do not fall into and liquids are not spilled into the
inside of the unit.

15

Damage Requiring Service – The unit should be serviced
by qualified service personnel when:

A.

The power-supply cord or the plug has been damaged;
or

B.

Objects have fallen, or liquid has been spilled into the unit;
or

C.

The unit has been exposed to rain; or

D.

The unit does not appear to operate normally or exhibits a
marked change in performance; or

E.

The unit has been dropped, or the cabinet damaged.

16

Servicing – The user should not attempt to service the unit
beyond those means described in the operating
instructions.  All other servicing should be referred to
qualified service personnel.

17

Power Lines – An outdoor antenna should be located
away from power lines.

18

Grounding or Polarization – Precautions should be taken
so that the grounding or polarization is not defeated.

19

Outdoor Antenna Grounding – If an outside antenna is
connected to this unit, be sure the antenna system is
grounded so as to provide some protection against
voltage surges and built-up static charges.  Article 810 of
the National Electrical Code, ANSI/NFPA 70, provides
information with regard to proper grounding of the mast
and supporting structure, grounding of the lead-in wire to
an antenna discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to
grounding electrodes, and requirements for the grounding
electrode.

SAFETY INSTRUCTIONS

(for U.S. customers)

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:  TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert you to the
presence of uninsulated “dangerous
voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.

The exclamation point within an
equilateral triangle is intended to alert
you to the presence of important
operating and maintenance
(servicing)  instructions in the
literature accompanying the
appliance.

• Explanation of Graphical Symbols

CAUTION

WARNING
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS
UNIT TO RAIN OR MOISTURE.

EXAMPLE OF ANTENNA GROUNDING

MAST

GROUND
CLAMP

ANTENNA
LEAD IN
WIRE

ANTENNA
DISCHARGE UNIT
(NEC SECTION 810–20)

GROUNDING CONDUCTORS
(NEC SECTION 810–21)

GROUND CLAMPS

POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250. PART H)

ELECTRIC
SERVICE
EQUIPMENT

NEC 

– NATIONAL ELECTRICAL CODE

Summary of Contents for CC-90

















































Reviews: