background image

21

Repeat play

All discs, an entire disc, a single track or a programmed
sequence can be continuously repeated.

1

While watching the display, press the REPEAT button
once or more to select a desired repeat play mode (S
REP, F REP or A REP).

2

Press the play/pause button.

Repeat play modes

SINGLE REPEAT (S REP)
A single track is played back repeatedly.

* This is also available in the program play mode and the

random play mode. (If the repeat play mode is switched off,
the program play mode or the random play mode will be
resumed.)

FULL REPEAT (F REP)
A designated disc is played back repeatedly.
* In the random play mode, the selected disc is repeatedly

played back, but the order of tracks is different every time.

ALL REPEAT (A REP)
All discs in the disc table are played back repeatedly.
* In the program play mode, a sequence of programmed

tracks is played back repeatedly.

* In the random play mode, the random play is performed

among all discs and repeated with a different order of
tracks every time.

To cancel the repeat play

Press the REPEAT button once or more so that the (S, F, A)
REP indicator goes out.

COMPACT DISC PLAYER OPERATION

CD Player

-

+

1

2

3

4

5

1

2

3

4

5

6

7

8

6

7

8

9

0

A

B

C

D

E

TIME

PROG

TAPE

EDIT

+

I0

SEARCH

SKIP

STOP

PLAY/PAUSE

DISC SKIP

RANDOM

REPEAT

CD

TUNER

TAPE

PRESET

A/B/C/D/E

DOWN

UP

PLAY

STOP

PLAY

REC/PAUSE

SLEEP

POWER

DISPLAY

VOLUME

DECK

PHONO/AUX

TUNER DIRECT

A/B

1                 2

1

2

off

S REP

A REP

F REP

Summary of Contents for CC-90

















































Reviews: