2
En
INTRODUCTION
1
Disc tray
Loads a disc.
2
(Open/Close)
Opens or closes the disc tray. For loading and unloading
discs, see page 8.
3
(Power)
Press inward to the ON position to turn on the power.
y
• The power indicator above lights up when this unit is turned on.
• You can turn this unit to a standby status with STNDBY/ON on
the remote control.
• This unit is equipped with the Auto standby function. By
turning on the function, this unit turns to the standby mode
automatically when disc playback is stopped for 30 minutes.
For details, see page 13.
4
Power indicator
Lights up as follows:
ON: Bright
Standby mode: Dark
OFF: Off
5
DISC (1-5)
Selects a desired disc and starts playback.
6
PURE DIRECT
Turns on or off the PURE DIRECT mode to improve
audio quality.
y
• The PURE DIRECT indicator lights up.
• The digital output is turned off.
• The front panel display is turned off during playback and only
the minimum required indicators and messages are displayed
during in the operation.
Connect using the ANALOG OUT terminals when you use
PURE DIRECT mode (refer to page 4).
7
Remote control sensor
Receives signals from the remote control.
8
iPod/USB port
Connect your iPod or USB device. See page 9 for details.
9
iPod/USB indicator
Off: CD mode is selected.
Orange: Connection ready.
Green: iPod/USB is connected and playable files have
been detected (playback ready).
0
CD/USB
Switches between CD mode and iPod/USB mode. See
page 9.
y
When the iPod/USB indicator is not lit, this unit is in the
CD mode.
A
/
(Skip/Search backward),
/
(Skip/Search forward)
/
: Skips to the next track.
/
: Skips back to the beginning of the current
track.
/
(twice): Skips to the previous track.
Press and hold
/
or
/
to search
backward/forward.
B
(Play) /
(Pause)
Starts or pauses playback. Press / again to resume
playback.
C
(Stop)
Stops playback.
D
PLAYXCHANGE
Opens the disc tray during playback without interrupting
disc playback. See page 8 for details.
CONTROLS AND FUNCTIONS
Front panel
Note
