CONNECTIONS
10
En
You can play back music files stored on your PC or NAS, audio contents on the Internet, by connecting this unit to a
network.
Connect with a commercially available STP (shielded twisted pair) network cable (CAT-5 or higher, straight-through
cable).
• All devices other than this unit are sold separately.
• You need to configure your PC or NAS after connecting. For details on settings, see “SETUP OF YOUR PC/NAS/MOBILE
• Wired connections are recommended for each device to sustain high sound quality.
When you have established all cable connections, turn on this unit and other system components.
y
• With the power switch on, you can switch this unit to on or standby mode by pressing the power button on the remote control (
P.6).
• For details on standby mode, see “Front panel” (
P.5).
Connecting to a network (PC/NAS/Internet connection)
R
L
COAXIAL
OPTICAL
DIGITAL OUT
NETWORK
AC IN
ANALOG OUT
LAN
WAN
Network cable
This unit (CD-N500)
PC
NAS
Broadband router
Internet
Modem
Notes
Turning on this unit
PURE DIRECT
S
OURCE
S
ELECT
ENTER
PU
S
H
RETURN
5V 2.1A
Press the power switch to turn this unit on.