En
45
Engl
ish
Updating the firmware
When a new firmware for the unit is released, a message to update your current firmware will be shown on the front panel display (when the unit is connected to the Internet only).
In this page, an updating method via a network using the option setting is shown.
1
Press .
•
The option menu is shown on the front panel
display.
2
Select [Firmware Update] with
S
/
T
,
and press
.
3
Select [Update] with
S
/
T
and press
.
4
Select [Network] with
S
/
T
, and press
.
•
Press
ENTER
again, then update starts.
•
When update finishes, messages are shown in the
following order: “UPDATE SUCCESS”, “PLEASE ...”,
and “POWER OFF!”
5
Press
A
on the front panel.
•
Update is applied.
S
/
T
ENTER
2
,
3
,
4
OPTION
1
•
Do not operate the unit or disconnect the power
cable and network cables while updating.
•
When Internet speed is not fast enough or the unit
is connected to the wireless network via a wireless
network adapter, network update may not be
possible depending on the condition of the
wireless connection. In this case, try again or update
the firmware using a USB memory device. The
firmware can be downloaded from the Yamaha
Website.
To update the firmware using a USB memory
device
You can download the firmware to the USB memory
device, and connect that USB memory device to the
USB jack on the unit.
•
Select [USB] in step 4 to start the update.
