background image

23

English

NOTES ABOUT HANDLING COMPACT DISCS

This compact disc player is designed for playing compact
discs bearing the         mark only.  Never attempt to load any
other type of disc into the unit.
The unit will also play 8-cm (3-inch) compact discs.

Compact discs are not subjected to wear during play, but
damage to the disc surface when the disc is being handled
can adversely affect the disc’s play.

Do not use cleaning discs or warped discs.  All of these
could damage the unit.

To prevent a malfunction of this unit

Do not use any non standard shaped CD (heart, etc.)
available on the market, because it may damage the unit.

Do not use a CD with tape, seals, or paste on it, because
damage to the unit may result.

Compact discs are not affected by small particles of dust or
fingerprints on their playing surface, but even so they should
be kept clean.  Wipe by using a clean, dry cloth.  Do not
wipe with a circular motion; wipe straight outward from the
center.

Do not try to clean the disc’s surface by using any type of
disc cleaner, record spray, anti-static spray or liquid, or any
other chemical-based liquid, because such substances
might irreparably damage the disc’s surface.

Do not expose discs to direct sunlight, high temperature or
high humidity for a long period of time, because these might
warp or otherwise damage the disc.

,,,

,,,

,,

,,

,

,

,

NO!

Summary of Contents for CDC-505

























Reviews: