background image

DIRECT PLAY

Select a desired track by using the numeric buttons.

Example: To select track 25
Press 

twice, then immediately press 

once.

* If a track number higher than the highest track number on

the disc is selected, the last track on the disc will be played.

SKIP PLAY

To play from the beginning of the track following the one now
playing

To play from the beginning of the track now playing

To play from the beginning of the track before the one now
playing

These operations can also be performed when the unit is
paused or stopped.

When using the SKIP button on the remote control 
transmitter:

If the button is pressed and held, the track number is 
continuously changed to higher numbers (or lower 
numbers).

When using the SKIP/SEARCH buttons on the front panel:

Be careful not to press and hold a button, otherwise the
selected track is played forward (or backward) rapidly.

+

10

10

SKIP

To play a desired track on the disc

5

 5  6  7  8  9  10  11  12  

1DISC

SKIP

SKIP

The selected track
number is displayed.

5

To advance rapidly

To reverse rapidly

The sound can be heard (although slightly garbled) during
manual search in either direction.  This is convenient for
locating a precise position within a track, or for reviewing the
contents quickly.

Manual search can also be performed while disc play is
paused, though no sound will be heard.

When using the SKIP/SEARCH buttons on the front panel:
Be careful not to release the button just after it is pressed,
otherwise the play is skipped to the beginning of the next
track or returned to the beginning of the current track.

To advance or reverse play rapidly (MANUAL SEARCH)

SEARCH

SEARCH

(Press and hold.)

(Press and hold.)

(Twice)

Summary of Contents for CDC-565



























Reviews: