1
Stop the unit.
2
Select the disc.
3
The peak level searching function of this unit is useful
for adjusting recording level on the tape deck. (Refer to
page 23.)
4
Enter the tape’s total possible recording time (tape length).
You can select any of four tape lengths by pressing the
TAPE button.
5
Otherwise, you can also enter the tape’s total possible
recording time manually.
Example: For a C-64 tape (32 minutes on each side)
6
Press the REPEAT button.
The unit automatically programs tracks for side A and
side B separately considering the tape’s total time.
7
Begin recording on the tape deck and press the PLAY
button on this unit at the same time.
8
The unit will pause at the end of side A of the tape.
Turn the tape over to side B. Resume recording and, at
the same time, press the PLAY or PAUSE button on
this unit.
Notes
●
All tracks may not be programmed if the tape’s length is not
enough. To program all tracks, use a longer tape.
●
In step 6, you can check the program data for side A and
side B.
➀
Shows the number of programmed tracks for each side in
turn just after the automatic programming is finished, and
then it is replaced by the number of the first programmed
track for side A.
➁
Shows the total time of programmed tracks for each side.
➂
Shows the programmed track numbers for each side.
●
CD synchronized recording function can be used if your tape
deck is compatible with it. In this case, in step 7 and 8, press
the SYNCHRO button and then press the PLAY button on
this unit’s remote control transmitter. Recording automatically
begins. (For details, refer to page 19.)
20
1 2 3 4 5
TOTAL
PROG
➀
➁
➂
4
TRACK PROGRAMMING FOR RECORDING TO TAPE
for CDC-655 only
for CDC-765 and CDC-665 only
This convenient feature can be used to program tracks for recording to tape. By only memorizing the tape’s total possible recording
time, the unit will automatically program tracks or help you to program tracks so they will fit onto the tape with the least amount of
unrecorded space remaining at each end of the tape.
■
Automatic tape programming
The unit will automatically program tracks on a disc with the original
order of tracks unchanged.
2
1
TAPE
SYNCHRO
3
INDEX
PROG
CLEAR
8
7
9
0
5
4
6
+
I0
DIMMER
TIME
OPEN/
CLOSE
REPEAT
RANDOM
MODE
DISC SCAN
SEARCH
SKIP
OUTPUT LEVEL
–
+
STOP
PAUSE
PLAY
DISC SKIP
2
5
7, 8
8
6
1
4
STOP
6
➁
➀
TAPE
REPEAT
DISC SKIP
(off)
TAPE
