background image

10

1

2

3

Select whether to mix up tracks from one disc or all
discs in the tray.

* If the “SINGLE” disc play mode is selected, next select a

desired disc by using the DISC SKIP buttons or a DISC-
select button.

4

To cancel random-sequence play

Press the STOP button or RANDOM button once again, or
open the disc tray by pressing the OPEN/CLOSE button.

Notes

This feature will not function during programming, or during
programmed play.

If the POWER is switched off when the random-sequence
play mode is functioning, when the POWER is switched on
again, the unit will begin the random-sequence play
automatically.  (This feature is available for timer play.)

If the SKIP

button is pressed during random-sequence

play, the next randomly programmed track will be played.  If
the SKIP

button is pressed, play will return to the

beginning of the track now being played.

This indication appears while the unit is
mixing up tracks.

Total remaining time on the disc will not be displayed during
random-sequence play.

2

3

4

OPEN/CLOSE

MODE

RANDOM

RANDOM-SEQUENCE PLAY

You can play the tracks in a random sequence (up to 99 tracks).  The unit will automatically mix up tracks from all discs or any
desired disc in the disc tray.

Summary of Contents for CDC-98

















Reviews: