6
LOADING DISCS/DISC PLAY
1
2
3
4
5
Select the disc play mode (DISC MODE: SINGLE or
ALL) while watching the display.
“SINGLE” mode: The unit will play a designated disc only.
“ALL” mode: The unit will play all discs in the tray in
sequence.
6
* If necessary, select a desired disc by using a DISC-select
button or the DISC SKIP buttons.
Notes
●
After closing the disc tray by pressing the OPEN/CLOSE
button in the stop mode or after selecting any disc by using
the DISC SKIP buttons, the display shows the total number
of tracks and the total recorded time of the disc to be played
for a few seconds.
●
Additionally, you can close the disc tray by pressing the PLAY
button, a DISC-select button, a numeric button (on the remote
control transmitter) or the RANDOM button, or by pressing the
front edge of the disc tray gently. If the tray is closed in these
ways, play will begin automatically, however, the display will
not show the total number of tracks and the total recorded time
of the first disc to be played.
PLAYXCHANGE
During play, you can open the disc tray by pressing the
PLAYXCHANGE button without interrupting disc play.
However, in this case, pressing the DISC SKIP buttons has no
effect.
Note
You can load or replace discs on the trays when the disc tray
is opening, however, never load a disc on the tray hidden
inside the unit. In doing so, the disc and the unit may be
damaged, because the tray already has a disc, which is being
played.
2, 4
3, 6
6
6
5
1
POWER
OPEN/CLOSE
DISC SKIP
OPEN/CLOSE
MODE
PLAY
1
2
3
4
5
DISC
DISC SKIP
PLAY
Shows the selected disc
mode.
Label side
upward
Disc tray
Load the fifth disc.
