background image

18

Each time you press 

TEXT/TIME

 the display changes as

follows:

Note

• The disc title, artist names, or track names may not be

displayed with some CD TEXT discs. In this case, “(NO
ENTRY)” appears on the display for about two seconds and
then go back to the time display.

Selecting the time

display and CD TEXT

You can select any of four time displays by pressing

TEXT/TIME

. When you play a CD with CD TEXT, the

disc title, artist name, and track name are also displayed.

Elapsed time of the
current track

Disc title

Artist name

Track name

• “CD-TEXT” appears on the display if

a CD has CD TEXT.

Total remaining time of
the disc

Total disc play time

Remaining time of the
current track

POWER

1

2

3

1

2

3

4

5

6

4

5

6

7

8

9

7

8

0

+10

+100

REP

RANDOM

PROG

MODE

A

B

C

TEXT/TIME

DISC SKIP

D

E

TEXT/TIME

0 3

3 : 5 3

1 2 3

3DISCS

3 4 5 6 7

0 3

- 2 : 2 2

1 2 3

3DISCS

3 4 5 6 7

0 3 ( T )

5 0 : 3 3

1 2 3

3DISCS

3 4 5 6 7

0 3 ( T )

- 3 3 : 0 0

1 2 3

3DISCS

3 4 5 6 7

CD OPERATIONS

To change the disc play mode

If necessary, change the disc play mode by pressing

MODE

 on the remote control.

All disc play mode:

1DISC

3DISCS

1 2 3

All disc on the disc tray are
played sequentially.

Only the designated disc is
played.

Single disc play mode:

To select another disc

Press 

DISC SKIP

 once or more.

The circle around the selected disc number lights up.

(Example) When the disc 2 is selected.

To exchange a disc (or discs) while
playing (PLAYXCHANGE)

You can open the disc tray without interrupting play by
pressing one of 

DISC 1/2/3

   (not the currently playing

one).

The current track number

0109CRXE500(U).17-20.E

02.7.9, 4:41 PM

18

Summary of Contents for CDC-E500
































Reviews: