1
4
Press the INPUT button
2
(several times) to select ANALOG.
Select ANALOG here since this example uses LP (analog) recording.
OPTICAL
INPUT
COAXIAL
ANALOG
(If the input source routes through OPTICAL IN, select OPTICAL,
and if it routes through COAXIAL IN, select COAXIAL.)
5
Press the MENU button
4
to display the Level adjustment
window and adjust the recording level by rotating the
ANALOG REC LEVEL knob on the front panel.
To adjust the recording level, you need to play back the sound
source. Adjust the recording level within the appropriate range
(avoiding the red area of the peak level meter at volume peaks).
(The default value of the digital recording level is set to 0dB [the
original level of the input source]. To adjust, see page 34 in the
Owner’s Manual.)
6
If necessary, select and set the HDD recording mode.
You can select a suitable recording mode that provides a track
marker between songs. Track Synchro is selected as the default.
Track Synchro is appropriate for normal recording.
There are five modes.
For more information, see page 35 in the Owner’s Manual.
Recording Mode
Start/Stop Recording
Description
Track Marker
Manual
Manual
To place track markers manually.
Start/stop of song playback is also
manual.
Manual
Track Synchro
Manual
Track markers will automatically
be placed between songs according
to song playback. Start/stop song
playback manually.
Auto
Multi Synchro
*1
Auto
Track markers will automatically be
placed between songs according to
song playback. Designated songs will
automatically be recorded.
Auto
NOTE
You can select the input source
by pressing the INPUT button
2
only when recording standby mode
is engaged. You cannot select it
unless engaged.
NOTE
You can select the input source
by pressing the INPUT button
2
only when recording standby mode
is engaged. You cannot select it
unless engaged.
