background image

*

To resume play, press the PAUSE button again or press the
PLAY button.

7

To stop play temporarily

To stop play completely

To play a desired track on the disc

DIRECT PLAY

Select a desired track using the numeric button.

Example: To select track 25
Press 

twice, then immediately press 

once.

If a track number higher than the highest track number on
the disc is selected, the last track on the disc will be
played.

SKIP PLAY

To play from the beginning of the track following the one now
playing

To play from the beginning of the track now playing

To play from the beginning of the track before the one now
playing

(twice)

*  These operations can also be performed when the unit is in

the pause or stop mode.

To advance or reverse play rapidly (MANUAL SEARCH)

To advance rapidly

(Press and hold.)

To reverse rapidly

(Press and hold.)

The sound can be heard (although slightly garbled) during
manual search in either direction.  This is convenient for
locating a precise position within a track, or for reviewing the
contents quickly. 

Manual search can also be performed while disc play is
paused, though no sound will be heard.

PAUSE

1

10

2

3

4

5

6

7

8

9

0

+

1

10

2

3

4

5

6

7

8

9

0

+

1

2

SEARCH

SEARCH

STOP

SKIP

SKIP

SKIP

The selected trak 
number is displayed

Summary of Contents for CDX-470



















Reviews: