Yamaha CDX-E200 Owner'S Manual Download

Page: 31 / 31

ADDITIONAL INFORMATION

Specifications

<RX-E200>

Amplifier section

Minimum RMS output power per channel

.............................................. 50 W + 50 W (6

Ω

1kHz 0.07% THD)

.............................. 40 W + 40 W (6

Ω

20 Hz to 20 kHz 0.1% THD)

DIN Standard output power per channel (Europe model)

................................................ 60 W + 60 W (4

Ω

1kHz 1.0% THD)

Input sensitivity/Impedance

CD/TAPE/MD/AUX

................................................................................... 150 mV/47 k

Ω

Frequency Response

CD etc. ...................................................... 20 Hz to 20 kHz, ±0.5 dB

Total Harmonic Distortion (20 Hz to 20 kHz)

CD etc. 20 W, 6

Ω ...................................................................

0.04%

Signal-to-Noise Ratio (IHF-A Network)

CD etc. (250 mV, Input Shorted) ............................................ 98 dB

Output Level/Impedance

PHONES ..................................................................... 0.43 V/330

Ω

Tuner section

Tuning range

FM
[U.S.A. and Canada models]

.............................................................................. 87.5 – 107.9 MHz

[U.K., Europe, Australia and General models]

.......................................................................... 87.50 – 108.00 MHz

AM
[U.S.A. and Canada models]

................................................................................. 530 – 1710 kHz

[U.K., Europe and Australia models]

................................................................................. 531 – 1611 kHz

[General model]

................................................................. 530/531 – 1710/1611 kHz

Sensitivity

FM (S/N 30dB)

................................................................................................ 1.5 µV

FM (S/N 26dB) (DIN)

................................................................................................ 1.8 µV

.......................................................................................... 300 µV/m

General

Power supply

[U.S.A. and Canada models]

............................................................................... AC 120 V, 60 Hz

[Australia model]

............................................................................... AC 240 V, 50 Hz

[U.K. and Europe models]

............................................................................... AC 230 V, 50 Hz

[General model]

.................................................... AC 110/120/220/240 V, 50/60 Hz

Power consumption

[U.S.A. and Canada models]

................................................................................................ 110 W

[U.K., Europe, Australia and General models]

................................................................................................ 100 W

Power Consumption (standby mode)

[U.S.A. and Canada models]

................................................................................................. 1.3 W

[U.K., Europe, Australia and General models]

................................................................................................. 1.4 W

Dimensions (W x H x D)

.......................................................................... 217 x 108 x 312 mm

Weight

................................................................................................. 4.5 kg

Accessories

.................................................................................. Remote control

Batteries

Indoor FM antenna

AM loop antenna

<CDX-E200>

CD player section

D/A converter

.......................................................................................... S-bit DAC

Frequency response

.................................................................. 20 Hz to 20 kHz, ±0.5 dB

S/N ratio

............................................................................................... 102 dB

Laser Diode Properties

• Material: GaAIAs
• Wavelength: 780 nm
• Emission duration: continuous
• Laser output: max. 44.6 µW*

* This output is the value measured at a distance of about 200 mm

from the objective lens surface on the Optical Pick-up Block.

General

Power supply

[U.K. and Europe models]

............................................................................... AC 230 V, 50 Hz

[General model]

.................................................... AC 110/120/220/240 V, 50/60 Hz

Power consumption

.................................................................................................. 13 W

Dimensions (W x H x D)

.......................................................................... 217 x 108 x 290 mm

Weight

................................................................................................. 3.0 kg

Accessories

................................................................................... RCA pin cable

System control cable

Specifications are subject to change without notice.

Summary of Contents for CDX-E200
































Search results

Summary of Contents for CDX-E200

Reviews:

Related manuals for CDX-E200

Brands by name

Popular brands

Yamaha CDX-E200, Owner'S Manual

Search results

Summary of Contents for CDX-E200

Reviews:

Related manuals for CDX-E200

Brands by name

Popular brands