3
CLP-110
ATTACHING THE KEYBOARD STAND STABILIZERS (U Only)
IMPORTANT!
Be sure to attach the stabilizers to the keyboard stand prior to use to ensure maximum stability.
Be sure to attach the stabilizers to the keyboard stand feet prior to assembly of the keyboard stand.
1.
Make sure that you have two stabilizers and four screws (one stabilizer for each of the keyboard stand feet and one 3.5X20mm
screw and one 3.5X14mm screw for each of the stabilizers).
■
SPECIFICATIONS
Keyboard
88 keys (A-1 - C7)
Sound Source
AWM Stereo Sampling
Polyphony
32 Notes Max.
Voice Selection
10
Effect
Reverb
Volume
Master Volume
Controls
Dual, Metronome, Transpose
Pedal
Damper
Demo Songs
10 voice Demo Songs, 50 preset Songs
Jacks/Connectors
MIDI (IN/OUT/THRU), PHONES x 2, DAMPER PEDAL
Main Amplifiers
20W x 2
Speakers
Oval (12cm x 6cm) x 2
Power Consumption
48W
Dimensions (W x D x H)
1345mm x 426mm x 814mm [52-15/16" x 16-3/4" x 32-1/2"]
(with music stand)
1345mm x 426mm x 967mm [52-15/16" x 16-3/4" x 38-11/16"]
Weight
36kg (79lbs. 6oz)
Accessories
Owner’s Manual, “50 greats for the Piano” (Music Book),
Bench (included or optional depending on locale), Quick Operation Guide,
Damper Pedal
3.5X20mm screws
3.5X14mm screws
2.
Remove the anti-skid bracket from the rear side of the keyboard stand feet. Keep the anti-skid bracket and screws for future use.
3.
Position the stabilizer on the keyboard stand foot so the rear of the stabilizer extends beyond the end of the foot. Align the rear
foot hole with the rear stabilizer hole. Insert and tighten one of the 3.5X20mm screws. Then insert one of the 3.5X14mm screw
in the front hole, and tighten it. Tighten the screw very firmly since there is no front screw hole on the feet. See the illustration
below.
Do not slide the unit on the floor with the stabilizers attached to the feet. Otherwise, the floor will be scratched.
MAKE SURE THAT ALL SCREWS ARE TIGHTNED FIRMLY.