92
CLP-970
Message List
The messages are listed in alphabetical order.
Message
Meaning
This message is displayed following the message “BulkDataReceiving Song/
Voice.” Receiving bulk data is complete. After this message appears, you can
proceed to the next step.
Receiving bulk data has failed. Check the parameter settings and try again.
The Clavinova is receiving the song bulk data while this message is dis-
played. Wait until the message disappears, then proceed to the next step.
The Clavinova is receiving the voice setting bulk data while this message is
displayed. Wait until the message disappears, then proceed to the next step.
You have cancelled the “SongBulkDump” (page 86) or “VoiceBulkDump”
(page 86) transmission by pressing the B [–(NO)] button.
This message is displayed following the message “Executing.” The Clavi-
nova’s internal processing is complete. You may proceed to the next step.
Writing or reading data from the disk has failed. Try again. If you still see
this message, the disk may be damaged or the disk drive may have malfunc-
tion. If you see this message while using a brand new disk, it is more likely
that the disk drive is malfunctioning. Ask your Yamaha dealer for repair.
The floppy disk space is full and can no longer record data. Use a new disk
(page 53) or delete unnecessary files from the disk (page 53) to make room
for new data.
You attempted to eject a floppy disk from the disk drive while the drive was
writing or reading. The writing or reading operation is not complete yet. Try
it again.
Summary of Contents for Clavinova CLP-970
Page 21: ...21 CLP 970 Basic Operation CLP 970 21 ...
Page 68: ...68 CLP 970 ...
Page 69: ...CLP 970 69 Detailed Settings CLP 970 69 ...