11
CLP-970/CLP-970M/CLP-970C/CLP-970A/CLP-970AM/CLP-970AC
[28]
[29]
[29]
[26a] x 8
[26b] x 7
[27]
PNL
PNR
L C D
[48f]
[48f]
Panel Assembly
6
Panel Assembly
6-1
Remove the music rest assembly. (See procedure 1.)
6-2
Remove the speaker grille. (See procedure 2.)
6-3
Turn the speaker box assembly backwards and turn it up.
(See procedure 3.)
6-4
Remove the keycover assembly. (See procedure 5.)
6-5
Remove the eleven [11] screws marked [48f]. Panel
assembly can then be removed. (See Fig. 10)
6-6
Remove the six [6] screws marked [28] and remove
the five [5] screws marked [29]. The panel assem-
bly can then be removed. (See Fig. 11)
6-7
After removing the panel assembly, remove the
following screws. Each circuit board can then be
removed. (See Fig. 11)
PNL circuit board:
Eight [8] screws marked [26a]
PNR circuit board: Seven [7] screws marked [26b]
LCD:
Three [3] screws marked [27]
7
HP Circuit Board
7-1
Remove the music rest assembly. (See procedure 1.)
7-2
Remove the speaker grille. (See procedure 2.)
7-3
Turn the speaker box assembly backwards and turn it up.
(See procedure 3.)
7-4
Remove the keycover assembly. (See procedure 5.)
7-5
Remove the panel assembly. (See procedure 6.)
7-6
Remove the screw marked [45a]. The left end
block assembly can then be removed. (See Fig. 14)
7-7
Remove the three [3] screws marked [40]. The
headphones jack assembly can then be removed.
(See Fig. 12)
7-8
Remove the two [2] screws marked [3]. The
headphones jack assembly can then be removed
from HP circuit board. (See Fig. 12)
[48]: Bind Head Tapping Screw-1 3.5X12 MFZN2BL (EP030340)
(Fig. 10)
[3]
[3]
HP
[40]
(Fig. 12)
[26]: Bind Head Tapping Screw-B 3.0X8 MFZN2Y (EP600250)
[27]: Bind Head Tapping Screw-B 2.6X10 MFZN2Y (VD791000)
[28]: Bind Head Tapping Screw-1 3.5X10 MFZN2Y (EP030230)
[29]: Bind Head Tapping Screw-1 3.5X12 MFZN2BL (EP030340)
(Fig. 11)
[3]:
Special-purpose Hexagonal Nut 14X2 12.0 (VB508600)
[40]: Bind Head Tapping Screw-1 4.0X14 MFZN2Y (EP040230)