12
CLP-970/CLP-970M/CLP-970C/CLP-970A/CLP-970AM/CLP-970AC
[6]
(Fig. 13)
9
GH Keyboard Assembly
9-1
Remove the music rest assembly. (See procedure 1.)
9-2
Remove the speaker grille. (See procedure 2.)
9-3
Turn the speaker box assembly backwards and turn it up. (See procedure 3.)
9-4
Remove the keycover assembly. (See procedure 5.)
9-5
Remove the panel assembly. (See procedure 6.)
9-6
Remove the screw marked [45a]. The left end block assembly can then be removed. (See Fig. 14)
9-7
Remove the screw marked [45b]. The right end block assembly can then be removed. (See Fig. 14)
9-8
Remove the nine [9] screws marked [42] and the two [2] screws marked [44]. The GH keyboard assembly can then
be removed. (See Fig. 14)
*
Slide the keyboard unit backward, lift the front side at the center of the frame, and raise up the GH keyboard assembly to
remove.
*
Removing the GH keyboard assembly without raising up can cause the keyboard unit twisted and the frame
can be damaged.
*
When reinstalling, fasten the screw marked [44], then the screw marked [42].
10
PL Circuit Board
10-1
Remove the music rest assembly. (See procedure 1.)
10-2
Remove the speaker grille. (See procedure 2.)
10-3
Turn the speaker box assembly backwards and turn it up. (See procedure 3.)
10-4
Remove the keycover assembly. (See procedure 5.)
10-5
Remove the panel assembly. (See procedure 6.)
10-6
Remove the GH keyboard assembly. (See procedure 9.)
10-7
Remove the screw marked [7]. The PL circuit board can then be removed. (See Fig. 14)
[6]:
Bind Head Tapping Screw-1 3.5X10 MFZN2BL (EP030320)
[45]: Bind Head Tapping Screw-1 3.5X20 MFZN2Y (EP030470)
[44]
[42]
[7]
[42] [45b]
[45a]
[44]
[42]
Keyboard Assembly
PL circuit board
(Fig. 14)
[6]:
Bind Head Tapping Screw-1 3.5X10 MFZN2BL (EP030320)
[7]:
Bind Head Tapping Screw-1 3.5X12 MFZN2BL (EP030340)
[45]: Bind Head Tapping Screw-1 3.5X20 MFZN2Y (EP030470)
8
PSW Assembly
8-1
Remove the music rest assembly. (See procedure 1.)
8-2
Remove the keycover assembly. (See procedure 5.)
8-3
Remove the panel assembly. (See procedure 6-5.)
8-4
Remove the screw marked [45b]. The right end block
assembly can then be removed. (See Fig. 14)
8-5
Remove the two [2] screws marked [6]. The power
switch assembly can then be removed. (See fig. 13)